Showing posts with label COOLING AND EXHAUST. Show all posts
Showing posts with label COOLING AND EXHAUST. Show all posts

Wednesday, August 8, 2018

Computer/Controls - DAS/XD Add-On 2009-10-21-1290 DAS/XD ADD-ON 2009-10-21-1290 FOR PASSENGER CARS

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts

Technical Service Bulletin # LI58-40_P-048538 Date: 091125
Computer/Controls - DAS/XD Add-On 2009-10-21-1290
DAS/XD ADD-ON 2009-10-21-1290 FOR PASSENGER CARS
Topic number LI58.40-P-048538
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 11-25-2009
Validity DVD version 10/2009
Reason for change
Reason for block
Complaint:
FSCU212, FSCM221
Model series: 204, 207, 212
Complete variant coding cannot be read, selection FSCU in model series 204
DBE7
Model series: 169, 245
Incorrect parameters are written to the rain/light sensor.
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-10-21-1290 for passenger cars:
This add-on can be installed over DAS/XD version 10/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 295
Symptoms
Control unit/fault code
Validity

Computers/Control - DAS/XD Add-On 2009-09-28-1266 DAS/XD ADD-ON 2009-09-28-1266 FOR PASSENGER CARS

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts

Technical Service Bulletin # LI58-40_P-048526 Date: 091125
Computers/Control - DAS/XD Add-On 2009-09-28-1266
DAS/XD ADD-ON 2009-09-28-1266 FOR PASSENGER CARS
Topic number LI58.40-P-048526
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 11-25-2009
Validity DVD version 09/2009
Reason for change
Reason for block
Complaint:
CDID2
Model series: 204, 212
DAS personalizing cannot be performed
MCMSFL221 / MCMSFR221
Model series: 221 model ref. pkge.
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 245
Multicontour seat fails during air release procedure. The system becomes operational again after an ignition change.
Fault code 9E8900 is stored.
TV tuner
Model series: 221, 216
Notes adjusted with respect to. coding/extended options. Required in case of replacement of TV-05 (221) with TV-09 (221 model refinement
package).
SRS/airbag
Model series: X204
FC A208 cannot be erased even when stored.
ME
Model series: 204, 207, 212
Control unit programming for software 0094487540 reports: "The following control unit software versions are available for control unit
programming: 0094487540" After control unit programming, the control unit cannot be started up.
DTR
Model series: 221, 216
Control unit programming for hardware object number 2125450416 reports:
"The following control unit software versions are available for control unit programming: 2214420956" The control unit cannot be programmed."
CDI 5
Model series: 211
Control unit programming for software object number 010 448 51 40 reports: "No newer control unit software found".
ME
Model series: 451
Control unit programming for software object numbers 033 447 24 02 and 017 448 27 02 reports: "No newer control unit software found".
ME 9.7
Model series: 221
Control unit programming for several software object numbers reports: "No newer control unit software found".
ESP
Model series: 230
Control unit programming for software object numbers 230 448 02 02 and 211 448 08 02 reports: "No newer control unit software found".
ME 9.7
Model series: 219, 171
Control unit programming for hardware object number 0034467640 reports: "Control unit software versions are available for control unit
programming". After control unit programming, the control unit cannot be started up.
ETC
Model series: 204
Control unit programming for software object number 002 448 48 10 reports: "No newer control unit software found".
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 246
DCU-RF
Model series: 221
Control unit programming for hardware object number 221 870 96 91 reports: "Control unit software versions are available for control unit
programming". After control unit programming, the control unit cannot be started up.
ETC
Model series: 207
Control unit programming for software object number 002 448 54 10 reports: "No newer control unit software found".
ME9.7 (AMG)
Model series: 216, 221, 230
Control unit programming for several software object numbers reports: "No newer control unit software found".
ETC
Model series: 164, 251
The new transmission control unit VGS3NAG2 could not previously be programmed.
All flashable CUs
Model series: 204, 207, 212
FDOK redocumentation of CVN is not performed during SCN coding - SCN coding on vehicles with China variant of COMAND not possible. -
Enabling offline control unit programming not possible.
SIM271DE20
Model series: 204, 207, 212
SCN is not written during SCN coding
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-09-28-1266 for passenger cars:
This add-on can be installed over DAS/XD version 09/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 247
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 248
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 249
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 250
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 251
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 252
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 253
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 254
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 255
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 256
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 257
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 258
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 259
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 260
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 261
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 262
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 263
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 264
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 265
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 266
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 267
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 268
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 269
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 270
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 271
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 272
Control unit/fault code
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 273

Transmission Controls - Control Module Flashing Info.

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement PartsTechnical Service Bulletin # S-27_19-121 Date: 110824
Transmission Controls - Control Module Flashing Info.
Date: August 24, 2011
Order No.: S-B-27.19/121
Supersedes
Group: 27
SUBJECT: MY-All, Models All
Transmission Control Module Flashing
Do not flash the transmission control module, unless specifically instructed to do so in a technical document, such as a LI, Service Bulletin,
Campaign, or Diagnostic Tree; or the SDS Diagnostic System indicates to do so.
Failure to adhere to this policy will result in rejected warranty claim or a debit.

Tuesday, August 7, 2018

Computers/Control - DAS/XD Add-On 2009-09-28-1265 DAS/XD ADD-ON 2009-09-28-1265 FOR PASSENGER CARS

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts

Technical Service Bulletin # LI58-40_P-048524 Date: 091125
Computers/Control - DAS/XD Add-On 2009-09-28-1265
DAS/XD ADD-ON 2009-09-28-1265 FOR PASSENGER CARS
Topic number LI58.40-P-048524
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 11-25-2009
Validity DVD version 07/2009
Reason for change
Reason for block
Complaint:
ME 9.7
Model series: 463
Control unit programming for software object numbers 010 448 07 40 and 006 447 22 40 reports: "No newer control unit software found".
ME
Model series: 204, 207, 212
Control unit programming for software 0094487540 reports: "The following control unit software versions are available for control unit
programming: 94487540"
After control unit programming, the control unit cannot be started up.
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 227
TV tuner
Model series: 221, 216
Notes adjusted with respect to. coding/extended options. Required in case of replacement of TV-05 (221) with TV-09 (221 model refinement
package).
All flashable CUs
Model series: 204, 207, 212
FDOK redocumentation of CVN is not performed during SCN coding - SCN coding on vehicles with China variant of COMAND not possible.
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-2009-09-28-1265 for passenger cars:
This add-on can be installed over DAS/XD version 07/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 228
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 229
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 230
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 231
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 232
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 233
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 234
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 235
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 236
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 237
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 238
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 239
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 240
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 241
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 242
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 243
Control unit/fault code
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 244
Validity

Monday, August 6, 2018

Steering - Approved Hydraulic Fluids

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement PartsTechnical Service Bulletin # S-46_25-70A Date: 110809
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 109
Steering - Approved Hydraulic Fluids
Date: August 9, 2011
Order No.: S-B-46.25/70a
Supersedes: S-B-46.25/70, January 19, 2010
Group: 46
Revision a: Models 172, 197, 240 Added. Supersedes P-MAY-B-46.25171 as now consolidated.
SUBJECT: MY-All, Models 124, 129, 140, 163, 164, 170,171,172,197,199, 202, 203, 204, 207, 209, 210, 211, 212, 215, 216, 219, 220, 221, 230,
240, 251, 463
Approved Hydraulic Fluids for Steering Systems
Only use the following approved fluids in the event of hydraulic steering system repairs:
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 110
Hydraulic fluid A according to sheet 236.3; hydraulic fluid B according to sheet 345.0; and hydraulic fluid C according to sheet 344.0 (see Parts
Information above).
PARTS INFORMATION

Suspension - Noises From Front Axle Suspension Struts Noises from area of front axle suspension struts

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement PartsTechnical Service Bulletin # LI32-25_P-051123 Date: 111220
Suspension - Noises From Front Axle Suspension Struts
Noises from area of front axle suspension struts
Topic number LI32.25-P-051123
Version 1
Design group 32.25 Shock absorbers/damper struts/spring struts
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 87
Date 12-20-2011
Validity
Reason for change
Complaint:
Dull thumping noises or metallic rattling from the area of the front axle on slightly uneven roads or on repaired road surfaces.
Note:
Observe chassis number range!
Note:
Noises from the shock absorber are audible on small undulations and have a more metallic sound.
Note:
The noises occur in the lower vehicle speed range (20... approx. 70 km/h), see "1.mp3".
Note:
In this case, deviating from the normal procedure, replace both suspension struts.
Symptoms
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 88
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 89
Parts
WIS-References

Sunday, August 5, 2018

Engine Control - Engine Control Module (N3/10) Flashing

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement PartsTechnical Service Bulletin # S-54_21-244A Date: 110720
Engine Control - Engine Control Module (N3/10) Flashing
Date: July 20, 2011
Order No.: S-B-07.61/89a, S-B-54.21/244a
Supersedes: S-B-7.61/89, S-B-54.21/244, July 8, 2011
Group: 07, 54
Revision a: Revised with SDS instruction.
SUBJECT: MY-All, Models All
Engine Control Module (N3/10) Flashing
Do not flash the engine control module (N3/10), unless specifically instructed to do so in a technical document, such as a LI, Service Bulletin,
Campaign, or Diagnostic Tree; or the SDS Diagnostic System indicates to do so.
Failure to adhere to this policy will result in rejected warranty claim or a debit. Unnecessary flashing could have an adverse effect on vehicle
functionality.

Friday, August 3, 2018

Mercedes-Benz Men's 3.4 oz

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts
Mercedes-Benz Mercedes-Benz
Men's 3.4 oz Aftershave Balm. Mercedes-Benz by Mercedes-Benz is a Woody Spicy fragrance for men. This is a new fragrance. Mercedes-Benz was launched in 2012. The nose behind this fragrance is Olivier Cresp. Top notes are bergamot amalfi lemon and mandarin orange. Middle notes are galbanum nutmeg violet and pepper. Base notes are vetiver patchouli and virginia cedar.

Mercedes-Benz Men's 2.5 oz EDT Spray (Unboxed).

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts
Mercedes-Benz Mercedes-Benz
Men's 2.5 oz EDT Spray (Unboxed). Mercedes-Benz by Mercedes-Benz is a Woody Spicy fragrance for men. This is a new fragrance. Mercedes-Benz was launched in 2012. The nose behind this fragrance is Olivier Cresp. Top notes are bergamot amalfi lemon and mandarin orange. Middle notes are galbanum nutmeg violet and pepper. Base notes are vetiver patchouli and virginia cedar.

A/T - Hard 2-3 Upshift Or Slips, No 3rd Gear/DTC's Stored Uncomfortable Upshift 2-3

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts

Technical Service Bulletin # LI27-60_P-051470 Date: 110323
A/T - Hard 2-3 Upshift Or Slips, No 3rd Gear/DTC's Stored
Uncomfortable Upshift 2-3
Topic number LI27.60-P-051470
Version 1
Design group 27.60 gearshift, control
Date 03-23-2011
Validity All models with transmission 722.9
Reason for change
Complaint:
Hard shift operation 2-3 upshift or transmission slips (3rd gear may not be reached)
Fault codes P2502, 2505, 0894, 2711 can be entered.
Cause:
K1 piston damaged (adaptation data of shift operation 2-3 on positive/negative end stop, +20/-20 and/or +2000/-2000).
Remedy:
If the complaint can only be reproduced for the upshift from gear 2 to gear 3 or if the 3rd gear cannot be reached, there is a defect in the K1 piston.
1. Replace complete multidisk clutch Ki as per EPC.
2. Then readapt the vehicle.
Symptoms
2010 Mercedes Benz SL 550 (230.471) V8-5.5L (273.965)   Page 46
Works Units

Brakes - Rear Brake Squeal REAR BRAKES SQUEAL WHEN APPLIED

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts

Technical Service Bulletin # LI42-10_P-048315 Date: 091208
Brakes - Rear Brake Squeal
REAR BRAKES SQUEAL WHEN APPLIED
Topic number LI42.10-P-048315
Version 1
Design group 42.10 Service brake
Date 12-08-2009
Validity Model 212.056 with code (494/050/Q06) and model 212. 072 with code 494.
Reason for change
Reason for block
Complaint:
Rear wheel brake squeal when braking.
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 179
Cause:
Resonant vibrations
Remedy:
1. Check brake pads for ease of movement.
2. Remove brake pads from brake pad slots and clean the slots if necessary.
3. Replace brake pads and housing retaining springs.
Note:
Lubricate brake pads on their guide pieces ("hammer heads") with MB Plastilube brake paste, see attachment.
Remark:
- As a rule brake disks do not have to be replaced due to brake squeal. One exception is major score marks or waviness resulting from wear. In, this
case the possibility of brake squeal cannot be fully ruled out.
- Reproduce squealing noise when braking and ensure that the noise is caused by the rear axle.
- If necessary, use the help of an assistant to localize the noise.
Attachments
Symptoms
Parts
Work Units
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 180
WIS-References
Validity
Attachment - Lubricate brake pads on guide pieces

A/C System - Update Of Vehicle System Technology Guide

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement PartsTechnical Service Bulletin # S-83_00-133 Date: 110726
A/C System - Update Of Vehicle System Technology Guide
Date: July 26, 2011
Order No.: S-B-83.00/133
Group: 83
SUBJECT: MY-All, Models 164,171, 203, 204, 207, 209, 211, 212, 215, 216, 219, 220, 221, 230, 251
Update of Vehicle A/C System Technology Guide
The Vehicle A/C System Technology Guide, Version 4 is available on Star Diagnosis SDmedia as of the 05-06/2011 DVD using Xentry diagnosis
and has been updated with the addition of models 212, 207, and 221.095/195.
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 111
The guide presents an overall picture for Mercedes-Benz vehicle A/C systems. All known fault profiles and control topics are summarized and
illustrated.

Thursday, August 2, 2018

Lighting - Headlamps/Front Fog Lamps Leaking Or Fogged Headlamps/front fog lamps leaking or fogged

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts

Technical Service Bulletin # LI82-10_P-050139 Date: 100818
2010 Mercedes Benz SL 550 (230.471) V8-5.5L (273.965)   Page 44
Lighting - Headlamps/Front Fog Lamps Leaking Or Fogged
Headlamps/front fog lamps leaking or fogged
Topic number LI82.10-P-050139
Version 1
Design group 82.10 Exterior lights
Date 08-18-2010
Validity All vehicles
Reason for change Remedy revised and the new model series incorporated / Supersedes DTB T-B-82.10/334
Complaint:
Headlamps/front fog lamps leaking or fogged
Cause:
As the headlamp is cooling down, e.g. after switching off, in rain or when washed, air is drawn in and the moisture from the air condenses on the
headlamp lens.
The ventilation of the headlamps ensures that this condensation is dissipated again after a short period of operation.
If the customer complains about fogging that is not present at the time of the workshop visit, then this is condensation. For these reasons,
condensation is a natural phenomenon and does not indicate a defect or malfunction; warranty and goodwill claims with this complaint will be
rejected.
Remedy:
Remedy 1:
A defective headlamp can be identified as follows:
1. Check headlamps for external damage and also check for correct seating/locking of the caps.
2. If the headlamp exhibits external damage:
3. Remove/install/replace headlamp.
4. Check headlamp setting and correct if necessary.
Note:
If there is external damage on the headlamp or if the caps are not correctly seated/locked, there is no grounds for a warranty or goodwill
case.
Remedy 2:
Clearing fogged/condensed headlamps:
1. Drive the vehicle into the workshop and connect the exhaust extractor.
Note:
In dry weather (temperature higher than +15°C/+59°F), you can also treat the vehicle out of doors.
Do not perform an engine wash before the defogging test.
2. Start the engine and switch on the following lights:
a. Main headlamps and front fog lamps fogged: High and low beams, front fog lamps, hazard warning system.
b. Only front fog lamps fogged: Front fog lamps.
3. Leave the vehicle in this state for 40 minutes.
4. Switch off all lights and the engine.
5. Check the fogging; a noticeable reduction in the amount of fogging must be visible (progress of defogging process).
2010 Mercedes Benz SL 550 (230.471) V8-5.5L (273.965)   Page 45
Note:
If no reduction in the degree of fogging is visible, the headlamp is defective and must be replaced.
It is not physically possible to defog the headlamps completely.
Fogging does not impair the operation or the service life of the headlamp.
Symptoms

Wednesday, August 1, 2018

Parking Assist - Parktronic Sensor Return Policy

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement PartsTechnical Service Bulletin # S-54_65-251 Date: 120207
Parking Assist - Parktronic Sensor Return Policy
Date: February 7, 2012
Order No.: S-B-54.65/251
Group: 54
SUBJECT:
MY-All, All Models with Code 220 Parktronic system (PTS); Code EZ8; Code 230 Advanced Parking Guidance; Code 235 Active Park Assist;
Code EZ8 Parktronic system (PTS)
Parktronic Sensor Return Policy
2010 Mercedes Benz SL 550 (230.471) V8-5.5L (273.965)   Page 50
Do not replace any Parktronic sensor under warranty that has (Figure 1) (A) (B) parking dents, stone chipping, or the like on the diaphragm cup-the
painted part of the senor.
In addition, perform a control log or quick test before replacing any sensor without external damage.
Mark the installation position (Figure 2) on the returned sensor and include the following when returning any Parktronic control unit, Parktronic
sensor, or Parktronic warning indicator under warranty:
^ Part return slip (ARS) (for residual market operations a return delivery document is also required)
^ Control Unit Log

Restraints - Repair And Diag. Of Airbag Wiring Harnesses

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts

Technical Service Bulletin # S-91_60-195A Date: 120118
Restraints - Repair And Diag. Of Airbag Wiring Harnesses
Date: January 18, 2012
Order No: S-B-91.60/195a
Supercedes: S-B-91.60/195, January 6, 2012
Group: 91
Revision a: Parts information removed. Reference EPC-net for relevant parts.
SUBJECT: MY-All, Models All
Repair and Diagnosis of Airbag Wiring Harness
When a driver airbag, front-passenger airbag, sidebag or windowbag or an emergency tensioning retractor is triggered, the coupling melts from the
gas generator heat and becomes unusable. Up until now, repair on airbag wiring harnesses was not permitted due to safety reasons and had to be
partly or completely replaced depending on type. As always follow most current part numbers and corresponding information in EPC before
ordering.
NOTE:
The part numbers for the solder connector are available in the EPC under the DG (design group) ...\54\019. The "Repairing wiring harness using
solder connectors" document is to be observed.
Follow WIS AR54.18-P-0600A Repair supplemental restraint system (SRS) squib wiring harness for Models:
Model 124, 126, 129, 140, 163, 164, 166, 168, 169, 170, 171, 172, 197, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221,
230, 240, 245, 246, 251, 414, 461, 463.
Follow WIS AR54.18-P-0600SLR Repair supplemental restraint system (SRS) squib wiring harness for Model: 199.

Parking Assist - Parktronic Sensor Return Policy

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement PartsTechnical Service Bulletin # S-54_65-251 Date: 120207
Parking Assist - Parktronic Sensor Return Policy
Date: February 7, 2012
Order No.: S-B-54.65/251
Group: 54
SUBJECT:
MY-All, All Models with Code 220 Parktronic system (PTS); Code EZ8; Code 230 Advanced Parking Guidance; Code 235 Active Park Assist;
Code EZ8 Parktronic system (PTS)
Parktronic Sensor Return Policy
Do not replace any Parktronic sensor under warranty that has (Figure 1) (A) (B) parking dents, stone chipping, or the like on the diaphragm cup-the
painted part of the senor.
In addition, perform a control log or quick test before replacing any sensor without external damage.
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 95
Mark the installation position (Figure 2) on the returned sensor and include the following when returning any Parktronic control unit, Parktronic
sensor, or Parktronic warning indicator under warranty:
^ Part return slip (ARS) (for residual market operations a return delivery document is also required)
^ Control Unit Log

Lighting - Headlamps/Front Fog Lamps Leaking Or Fogged Headlamps/front fog lamps leaking or fogged

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts



Technical Service Bulletin # LI82-10_P-050139 Date: 100818
Lighting - Headlamps/Front Fog Lamps Leaking Or Fogged
Headlamps/front fog lamps leaking or fogged
Topic number LI82.10-P-050139
Version 1
Design group 82.10 Exterior lights
Date 08-18-2010
Validity All vehicles
Reason for change Remedy revised and the new model series incorporated / Supersedes DTB T-B-82.10/334
Complaint:
Headlamps/front fog lamps leaking or fogged
Cause:
As the headlamp is cooling down, e.g. after switching off, in rain or when washed, air is drawn in and the moisture from the air condenses on the
headlamp lens.
The ventilation of the headlamps ensures that this condensation is dissipated again after a short period of operation.
If the customer complains about fogging that is not present at the time of the workshop visit, then this is condensation. For these reasons,
condensation is a natural phenomenon and does not indicate a defect or malfunction; warranty and goodwill claims with this complaint will be
rejected.
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 83
Remedy:
Remedy 1:
A defective headlamp can be identified as follows:
1. Check headlamps for external damage and also check for correct seating/locking of the caps.
2. If the headlamp exhibits external damage:
3. Remove/install/replace headlamp.
4. Check headlamp setting and correct if necessary.
Note:
If there is external damage on the headlamp or if the caps are not correctly seated/locked, there is no grounds for a warranty or goodwill
case.
Remedy 2:
Clearing fogged/condensed headlamps:
1. Drive the vehicle into the workshop and connect the exhaust extractor.
Note:
In dry weather (temperature higher than +15°C/+59°F), you can also treat the vehicle out of doors.
Do not perform an engine wash before the defogging test.
2. Start the engine and switch on the following lights:
a. Main headlamps and front fog lamps fogged: High and low beams, front fog lamps, hazard warning system.
b. Only front fog lamps fogged: Front fog lamps.
3. Leave the vehicle in this state for 40 minutes.
4. Switch off all lights and the engine.
5. Check the fogging; a noticeable reduction in the amount of fogging must be visible (progress of defogging process).
Note:
If no reduction in the degree of fogging is visible, the headlamp is defective and must be replaced.
It is not physically possible to defog the headlamps completely.
Fogging does not impair the operation or the service life of the headlamp.
Symptoms

Restraints - Seat Belt Buckle Warranty Replacement Information

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement PartsTechnical Service Bulletin # S-91_40-198 Date: 120427
Restraints - Seat Belt Buckle Warranty Replacement Information
Date: April 27, 2012
Order No.: S-B-91.40/198
Group: 91
SUBJECT: MY-All, Models All
Seat Belt Buckle
Seat belt buckle replacements will not be covered under warranty when there are glass splinters present in the buckle head. Test the seat belt buckle
function and check for broken glass when there are customer complaints that the seat belt buckle: closes poorly, is jammed, or is sluggish. Test by
inserting and releasing the seat belt tongue.
Do not submit belt buckle replacement under warranty where there are signs of breaking and entering or other types of vandalism.

COMAND(R) - Music Playback From iPhone(R) Is Not Resumed Media interface: Music playback from iPhone is not resumed after a phone call


Technical Service Bulletin # LI82-60_P-051747 Date: 120405
COMAND(R) - Music Playback From iPhone(R) Is Not Resumed
Media interface: Music playback from iPhone is not resumed after a phone call
Topic number LI82.60-P-051747
Version 1
Design group 82.60 Radio, audio/video systems
Date 04-05-2012
Validity NTG 4:
Model 207 up to chassis F 136 477 with COMAND APS with DVD changer (code 512) or COMAND APS (code 527) and Media Model 212 up to chassis A 490 568 with COMAND APS with DVD changer (code 512) or COMAND APS (code 527) and Media
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 81
Model 218 up to chassis A 019 332 with COMAND APS with DVD changer (code 512) or COMAND APS (code 527) and Media Reason for change
Complaint:
The media interface control unit (N125/1) is connected to an iPhone for music playback. At the same time the iPhone is connected over Bluetooth
with the hands-free system of the COMAND (40/3). Music playback is interrupted by an incoming phone call. When the phone call is completed,
music playback is sometimes not resumed. The visual track playback display is nevertheless visible on the COMAND unit.
Cause:
Software in COMAND (40/3).
Remedy:
Perform software update of COMAND (40/3).
Note:
The remedy is available as of Xentry Diagnostics version 07/11.
Symptoms
Work units

Body - Rear Bumper Sticks Out In Area Of Rear Lamp Rear bumper sticks out in area of rear lamp (S212, C218)

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts

Technical Service Bulletin # LI88-20_P-053415 Date: 120320
Body - Rear Bumper Sticks Out In Area Of Rear Lamp
Rear bumper sticks out in area of rear lamp (S212, C218)
Topic number LI88.20-P-053415
Version 1
Design group 88.20 Bumpers
Date 03-20-2012
Validity S212, C218
Reason for change
Complaint:
Rear bumper sticks out in area of rear lamp (picture 1)
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 76
Attachments
Cause:
Too much play between bracket for bumper and rear lamp (picture 2)
Thermal expansion causes the bumper sticks out in the area of the rear lamp
Attachments
Remedy:
The play between the rear lamp and the bumper must be eliminated. To this end, film is stuck onto the bracket of the bumper:
1. Measure protrusion to rear lamp on specified measuring points for determining the amount of film required
2. Remove bumper
3. Determine amount of film to be glued on:
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 77
- S212: Measurement 35 mm from tip of bumper (picture 3)
- C218: Measurement 70 mm from tip of bumper (picture 4)
Amount of film = Protrusion (mm) / 0.3 (mm) --> Film thickness is approx. 0.3 mm
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 78
4. Glue chafe protective film onto bracket to eliminate any play between the rear lamp and rib on the bumper. (Figure 5)
Note:
The bonding surfaces must be clean and free of grease
5. Mount bumper again
Attachments
Symptoms
Parts
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 79
Work Units