E1924

One or more signals sent from control unit N47-5 (ESP control unit) via the CAN bus is implausible.

Possible cause:

• N47-5 (ESP control unit)

  Affected functions:

  
  
• CAN Communication
• Drive position selection

-------------------------------------------------

Test 1: Check the CAN communication with control unit N47-5 (ESP control unit). Test 2: Chassis CAN test

Test 3: Fault in CAN communication with control unit N47-5 (ESP control unit).

1. Check the CAN communication with control unit N47-5 (ESP control unit). Warning!Communication with ECU required.

   
   

2. Chassis CAN test

   Warning!Communication with ECU required.

   
   

3. Fault in CAN communication with control unit N47-5 (ESP control unit).

   Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING
   
   
   • This is not a function error of control module A80 (Intelligent servo module for DIRECT SELECT) and does not justify replacement.
     Possible cause for the entry of this event code
     
     
   • Operational fault of component N47-5 (ESP control unit) Possible measures
     
     
   • Read out fault memory of control unit N47-5 (ESP control unit).
   • Process displayed fault codes in control module N47-5 (ESP control unit).
     End of test