| B1000 HRA HEADLAMP RANGE ADJUSTMENT: SUPPLY VOLTAGE OF THE CONTROL UNIT IS TOO LOW (UNDERVOLTAGE) |
|---|
| P201C-032 cylinder 3 interrupt device fuel insufficient |
| P201C-064 cylinder 4 interrupt device fuel insufficient |
| P201C-128 cylinder 2 interrupt device fuel insufficient |
| P201D P0171 [2] Selfadaptation of mixture formation ,: The mixture is too lean in the part load range. [P0171] |
| P201D P0171 [8] Selfadaptation of mixture formation ,: Mixture is too lean at idle speed. [P0171] |
| P201D P0172 [1] Selfadaptation of mixture formation ,: The mixture is too rich in the part load range. [P0172] |
| P201D P0172 [4] Selfadaptation of mixture formation ,: Mixture is too rich at idle speed. [P0172] |
| P201D Y62y1 (cylinder 1 injector)(P0201) |
| P201D Y62y1 (Fuel injector cylinder 1)(P0201) |
| P201D-001 mixture formation unit adaptation,part load mixture too rich.[P0172] |
| P201D-002 mixture formation unit adaptation,part load mixture too lean.[P0171] |
| P201D-004 mixture formation unit adaptation,idle mixture too rich.[P0172] |
| P201D-008 mixture formation unit adaptation,idle mixture too lean.[P0171] |
| P201E Y62y5 (cylinder 1 injector)(P0205) |
| P201E Y62y5 (Fuel injector cylinder 5)(P0205) |
| P201E-001 CAT effect too small [P0420] |
| P201F – [1] B40 (Oil sensor (oil level, temperature and quality)) ,: Electrical fault |
| P201F – [16] B40 (Oil sensor (oil level, temperature and quality)) ,: Oil quality is implausible. |
| P201F – [2] B40 (Oil sensor (oil level, temperature and quality)) ,: Oil temperature |
| P201F – [4] B40 (Oil sensor (oil level, temperature and quality)) ,: Oil quality |
| P201F – [8] B40 (Oil sensor (oil level, temperature and quality)) ,: Oil level |
| P201F Y62y3 (cylinder 5 injector)(P0203) |
| P201F Y62y4 (Fuel injector cylinder 4)(P0204) |
| P201F-001 B40 (engine oil sensor (engine oil condition,temperature and quality)),electrical malfunction |
| P201F-002 B40 (engine oil sensor (engine oil condition,temperature and quality)),engine oil temperature |
| P201F-004 B40 (engine oil sensor (engine oil condition,temperature and quality)),engine oil quality |
| P201F-008 B40 (engine oil sensor (engine oil condition,temperature and quality)),engine oil condition |
| P201F-016 B40 (engine oil sensor (engine oil condition,temperature and quality)),engine oil quality error |
| P2020 – [1] M4/3 (engine/AC electric suction fan) ,: Short circuit to positive |
| P2020 – [2] M4/3 (engine/AC electric suction fan) ,: Short circuit to ground / Open circuit in wiring |
| P2020 check fuel rail pressure:B4/6 (fuel rail pressure sensor) racing test. |
| P2020 check fuel rail pressure:Y74 (pressure regulation valve) racing test. |
| P2020 check fuel rail pressure:Y94 (flux regulation valve) racing test. |
| P2020 check Y74 (pressure regulation valve).Short |
| P2020 check Y94 (flux regulation valve).Short |
| P2020 Y62y2 (Fuel injector cylinder 2)(P0202) |
| P2020 Y62y6 (cylinder 5 injector)(P0206) |
| P2020-001 M4/3 (engine/A/C electronic intake air device),positive short |
| P2020-002 M4/3 (engine/A/C electronic intake air device),overload/wire open cause short |
| P2021 – [1] Relays Starter ,: Short circuit to positive |
| P2021 – [2] Relays Starter ,: Short circuit to ground / Open circuit in wiring |
| P2021 check Y74 (pressure regulation valve).Current in pressure regulation valve too large |
| P2021 check Y74 (pressure regulation valve).Current in pressure regulation valve too small.Fuel rail pressure too high. |
| P2021 check Y74 (pressure regulation valve).Current/fuel rail pressure too large |
| P2021 check Y74 (pressure regulation valve).Current/fuel rail pressure too small |
| P2021 check Y74 (pressure regulation valve).Fuel rail pressure too small. |
| P2021 check Y74 (pressure regulation valve).Maximal pressure will be rewrite. |
| P2021 check Y74 (pressure regulation valve).Negative regulation error |
| P2021 check Y74 (pressure regulation valve).Regulation error too large |
| P2021 Y62y2 (cylinder 5 injector)(P0202) |
| P2021 Y62y6 (Fuel injector cylinder 6)(P0206) |
| P2021-001 starter relay,positive short |
| P2021-002 starter relay,overload/wire open cause short |
| P2022 P0135 [1] Heating of component G3/2 (O2 sensor upstream TWC) ,: Short circuit to positive [P0135] |
| P2022 P0135 [2] Heating of component G3/2 (O2 sensor upstream TWC) ,: Short circuit to ground [P0135] |
| P2022 P0135 [4] Heating of component G3/2 (O2 sensor upstream TWC) ,: Open circuit in wiring [P0135] |
| P2022 P0135 [8] Heating of component G3/2 (O2 sensor upstream TWC) ,: Heating capacity is too low. [P0135] |
| P2022 check fuel injector.Cylinder 1 misfire |
| P2022 check fuel injector.Cylinder 2 misfire |
| P2022 check fuel injector.Cylinder 3 misfire |
| P2022 check fuel injector.Cylinder 4 misfire |
| P2022 check fuel injector.Cylinder 5 misfire |
| P2022 check fuel injector.Cylinder 6 misfire |
| P2022 check fuel injector.Cylinder 7 misfire |
| P2022 check fuel injector.Cylinder 8 misfire |
| P2022 Y62y3 (Fuel injector cylinder 3)(P0203) |
| P2022 Y62y4 (cylinder 5 injector)(P0204) |
| P2022-001 component G3/2 (before CAT O2 sensor) heating device,positive short [P0135] |
| P2022-002 component G3/2 (before CAT O2 sensor) heating device,overload short [P0135] |
| P2022-004 component G3/2 (before CAT O2 sensor) heating device,wire interrupt [P0135] |
| P2022-008 component G3/2 (O2 sensor before CAT) heating device,heating power too small.[P0135] |
| P2023 P0141 [1] Heating of component G3/1 (O2 sensor downstream TWC) ,: Short circuit to positive [P0141] |
| P2023 P0141 [2] Heating of component G3/1 (O2 sensor downstream TWC) ,: Short circuit to ground [P0141] |
| P2023 P0141 [4] Heating of component G3/1 (O2 sensor downstream TWC) ,: Open circuit in wiring [P0141] |
| P2023 P0141 [8] Heating of component G3/1 (O2 sensor downstream TWC) ,: Heating capacity is too low. [P0141] |
| P2023 check Y83 (intake air manifold turnoff switch valve).Circuit open |
| P2023 check Y83 (intake air manifold turnoff switch valve).It is OFF when left intake air manifold is closed. |
| P2023 check Y83 (intake air manifold turnoff switch valve).It is OFF when right intake air manifold is closed. |
| P2023 check Y83 (intake air manifold turnoff switch valve).It is ON when left intake air manifold is closed. |
| P2023 check Y83 (intake air manifold turnoff switch valve).It is ON when right intake air manifold is closed. |
| P2023 check Y83 (intake air manifold turnoff switch valve).Short |
| P2023 check Y83 (intake air manifold turnoff switch valve).Short to ground |
| P2023 K40/7kN (air pump relay)(P0410) |
| P2023-001 component G3/1 (O2 sensor before CAT) heating device,positive short [P0141] |
| P2023-002 component G3/1 (O2 sensor before CAT) heating device,overload short [P0141] |
| P2023-004 component G3/1 (O2 sensor before CAT) heating device,wire interrupt [P0141] |
| P2023-008 component G3/2 (O2 sensor before CAT) heating device,heating power too small.[P0141] |
| P2024 P0106 [4] B28 (Pressure sensor) ,: Signal B28 (Pressure sensor) not equal to signal B18 (Altitude pressure sensor) when engine not running [P0106] |
| P2024 P0107 [2] B28 (Pressure sensor) ,: Short circuit to ground [P0107] |
| P2024 P0108 [1] B28 (Pressure sensor) ,: Short circuit to positive / Open circuit in wiring [P0108] |
| P2024 check Y27/10 (right exhaust gas recirculation regulator) regulator fault (via ground key). |
| P2024 check Y27/10 (right exhaust gas recirculation regulator).Circuit open |
| P2024 check Y27/10 (right exhaust gas recirculation regulator).Short |
| P2024 check Y27/10 (right exhaust gas recirculation regulator).Short to ground |
| P2024 check Y27/9 (left exhaust gas recirculation regulator) regulator fault (via ground key). |
| P2024 check Y27/9 (left exhaust gas recirculation regulator).Circuit open |
| P2024 check Y27/9 (left exhaust gas recirculation regulator).Short |
| P2024 check Y27/9 (left exhaust gas recirculation regulator).Short to ground |
| P2024 Y32 (Air pump switchover valve)(P0412) |
| P2024 Y32/2 (air pump switch-over valve,right cylinder bank)(P0412) |
Showing posts with label Mercedes-Benz Fault Code List. Show all posts
Showing posts with label Mercedes-Benz Fault Code List. Show all posts
Wednesday, May 31, 2023
Mercedes-Benz Fault Code List
Friday, May 26, 2023
Mercedes-Benz Fault Code List
| B1000 HRA HEADLAMP RANGE ADJUSTMENT: SUPPLY VOLTAGE OF THE CONTROL UNIT IS TOO LOW (UNDERVOLTAGE) |
|---|
| P200E P0763 [8] Fault is stored in component N15/3 (ETC control module).: [P0763] |
| P200E G3/13 (right O2 sensor,after CAT,CYL 1-3) no special status variation |
| P200E G3/6 (Right O2 sensor,after TWC[CAT]) |
| P200E-001 component N15/3 (EGS controller) trouble stored.[P0702] |
| P200E-002 component N15/3 (EGS controller) trouble stored.[P0753] |
| P200E-004 component N15/3 (EGS controller) trouble stored.[P0758] |
| P200E-008 component N15/3 (EGS controller) trouble stored.[P0763] |
| P200E-016 component N15/3 (EGS controller) trouble stored.[P0743] |
| P200E-032 component N15/3 (EGS controller) trouble stored.[P0748] |
| P200E-064 component N15/3 (EGS controller) trouble stored.[P0748] |
| P200E-128 component N15/3 (EGS controller) trouble stored.[P0702] |
| P200F P0700 [16] Fault is stored in component N15/3 (ETC control module).: [P0700] |
| P200F P0700 [8] Fault is stored in component N15/3 (ETC control module).: [P0700] |
| P200F P0705 [2] Fault is stored in component N15/3 (ETC control module).: [P0705] |
| P200F P0715 [1] Fault is stored in component N15/3 (ETC control module).: [P0715] |
| P200F P0720 [4] Fault is stored in component N15/3 (ETC control module).: [P0720] |
| P200F P0730 [64] Fault is stored in component N15/3 (ETC control module).: [P0730] |
| P200F P0740 [32] Fault is stored in component N15/3 (ETC control module).: [P0740] |
| P200F G3/4 (Right O2 sensor,before TWC[CAT])(P0130) |
| P200F G3/9 (right O2 sensor,before CAT,CYL 1-3),too small voltage up (P0130) |
| P200F-001 component N15/3 (EGS controller) trouble stored.[P0715] |
| P200F-002 component N15/3 (EGS controller) trouble stored.[P0705] |
| P200F-004 component N15/3 (EGS controller) trouble stored.[P0720] |
| P200F-008 component N15/3 (EGS controller) trouble stored.[P0700] |
| P200F-016 component N15/3 (EGS controller) trouble stored.[P0700] |
| P200F-032 component N15/3 (EGS controller) trouble stored.[P0740] |
| P200F-064 component N15/3 (EGS controller) trouble stored.[P0730] |
| P2010 P0201 [4] Y62y1 (Fuel injector cylinder 1) ,: Open circuit in wiring [P0201] |
| P2010 P0261 [2] Y62y1 (Fuel injector cylinder 1) ,: Short circuit to ground [P0261] |
| P2010 P0262 [1] Y62y1 (Fuel injector cylinder 1) ,: Short circuit to positive [P0262] |
| P2010 Control module N15/3(ETC control module is not coded. |
| P2010 G3/13 (right O2 sensor,after CAT,CYL 1-3),electrical malfunction (P0136) |
| P2010 G3/6 (Right O2 sensor,after TWC[CAT])(P0136) |
| P2010-001 Y62/y1 (cylinder 1 fuel injector),positive short [P0262] |
| P2010-002 Y62/y1 (cylinder 1 fuel injector),overload short [P0261] |
| P2010-003 Y62/y1 (cylinder 1 fuel injector),wire interrupt [P0201] |
| P2011 P0203 [4] Y62y3 (Fuel injector cylinder 3) ,: Open circuit in wiring [P0203] |
| P2011 P0267 [2] Y62y3 (Fuel injector cylinder 3) ,: Short circuit to ground [P0267] |
| P2011 P0268 [1] Y62y3 (Fuel injector cylinder 3) ,: Short circuit to positive [P0268] |
| P2011 A16/1 (Knock sensor 1,right) |
| P2011 check B2/6 (left hot film air flow meter).Implausible |
| P2011 check B2/6 (left hot film air flow meter).Signal voltage too high. |
| P2011 check B2/6 (left hot film air flow meter).Signal voltage too low. |
| P2011 check B2/6 (right hot film air flow meter).Signal voltage too high. |
| P2011 check B2/6 (right hot film air flow meter).Signal voltage too low. |
| P2011 check B2/7 (right hot film air flow meter).Implausible |
| P2011 check hot film air flow meter.Creditability error |
| P2011 The coding of the control unit N15/3 (ETC control module) is impermissible. |
| P2011 The coding of the control unit N15/3(ETC control module) is impermissible. |
| P2011-001 Y62/y3 (cylinder 3 fuel injector),positive short [P0268] |
| P2011-002 Y62/y3 (cylinder 3 fuel injector),overload short [P0267] |
| P2011-003 Y62/y3 (cylinder 3 fuel injector),wire interrupt [P0203] |
| P2012 P0204 [4] Y62y4 (Fuel injector cylinder 4) ,: Open circuit in wiring [P0204] |
| P2012 P0270 [2] Y62y4 (Fuel injector cylinder 4) ,: Short circuit to ground [P0270] |
| P2012 P0271 [1] Y62y4 (Fuel injector cylinder 4) ,: Short circuit to positive [P0271] |
| P2012 check B17 (intake air temperature sensor).Signal voltage too high. |
| P2012 check B17 (intake air temperature sensor).Signal voltage too low. |
| P2012 The checksum of the standard software status for component N15/3 (ETC control module) is missing or is not entered. |
| P2012 Y58/4 (Activated charcoal canister shut-off valve)(P0446) |
| P2012 Y58/4 (canister lock valve)(work link)(P0446) |
| P2012-001 Y62/y4 (cylinder 4 fuel injector),positive short [P0271] |
| P2012-002 Y62/y4 (cylinder 4 fuel injector),overload short [P0270] |
| P2012-003 Y62/y4 (cylinder 4 fuel injector),wire interrupt [P0204] |
| P2013 P0202 [4] Y62y2 (Fuel injector cylinder 2) ,: Open circuit in wiring [P0202] |
| P2013 P0264 [2] Y62y2 (Fuel injector cylinder 2) ,: Short circuit to ground [P0264] |
| P2013 P0265 [1] Y62y2 (Fuel injector cylinder 2) ,: Short circuit to positive [P0265] |
| P2013 check B28 (pressure sensor).Intake air pressure/atmosphere pressure implausible |
| P2013 check B28 (pressure sensor).Signal voltage too high. |
| P2013 check B28 (pressure sensor).Signal voltage too low. |
| P2013 check B28/5 (pressure sensor behind the air cleaner).Atmosphere pressure value implausible. |
| P2013 check B28/5 (pressure sensor behind the air cleaner).Intake air manifold pressure signal too large. |
| P2013 check B28/5 (pressure sensor behind the air cleaner).Intake air manifold pressure signal too small. |
| P2013 Component N15/3(ETC control module) is faulty. |
| P2013 EGR system severe leaks (P0455) |
| P2013 Major leak in purge system (P0455) |
| P2013 N3/9 (controller CDI)/atmosphere pressure sensor.Signal voltage too high. |
| P2013 N3/9 (controller CDI)/atmosphere pressure sensor.Signal voltage too low. |
| P2013-001 Y62/y2 (cylinder 2 fuel injector),positive short [P0265] |
| P2013-002 Y62/y2 (cylinder 2 fuel injector),overload short [P0264] |
| P2013-003 Y62/y2 (cylinder 2 fuel injector),wire interrupt [P0202] |
| P2014 P0010 [1] Y49 (Adjustable camshaft timing solenoid) ,: Short circuit to positive [P0010] |
| P2014 P0010 [2] Y49 (Adjustable camshaft timing solenoid) ,: Short circuit to ground [P0010] |
| P2014 P0010 [4] Y49 (Adjustable camshaft timing solenoid) ,: Open circuit in wiring [P0010] |
| P2014 P0010 [8] Y49 (Adjustable camshaft timing solenoid) ,: Mechanical fault [P0010] |
| P2014 check B19/3 (left catalyzer temperature sensor after supercharger).Signal voltage too high. |
| P2014 check B19/3 (left catalyzer temperature sensor after supercharger).Signal voltage too low. |
| P2014 check B19/4 (right catalyzer temperature sensor,after supercharger).Signal voltage too high. |
| P2014 check B19/4 (right catalyzer temperature sensor,after supercharger).Signal voltage too low. |
| P2014 check B19/5 (left catalyzer temperature sensor before supercharger).Signal voltage too low. |
| P2014 check B19/5 (left catalyzer temperature sensor,before bottom catalyzer).Signal voltage too high. |
| P2014 check B19/6 (right catalyzer temperature sensor,before bottom catalyzer).Signal voltage too high. |
| P2014 check B19/6 (right catalyzer temperature sensor,before bottom catalyzer).Signal voltage too low. |
| P2014 EGR system slight leaks (P0442) |
| P2014 Purge control system has slight leak (P0442) |
| P2014-001 Y49 (camshaft control device regulation solenoid valve),positive short [P0010] |
| P2014-002 Y49 (camshaft control device regulation solenoid valve),overload short [P0010] |
| P2014-004 Y49 (camshaft control device regulation solenoid valve),wire interrupt [P0010] |
| P2014-008 Y49 (camshaft control device regulation solenoid valve),mechanical malfunction [P0010] |
| P2015 check start control.Circuit open |
| P2015 check start control.Short |
Subscribe to:
Posts (Atom)