Mercedes Benz Truck R 320 BLUETEC Technical S-00_40-89C Date: 111221 A/T - Operating Fluid Specification Changes

Mercedes Benz Truck R 320 BLUETEC Technical S-00_40-89C Date: 111221
A/T - Operating Fluid Specification Changes
Date December 21, 2011
Order No: S-B-00.40/89c
Supersedes S-B-00.40/89b September 1, 2011
Group: 00
Revision C: Added exception note.
SUBJECT: MY - All, Models All with Transmission 722.6 or 722.9
Operating Fluid Specification Changes for Automatic Transmission
5-speed automatic transmission 722.6
Only use the transmission oils outlined in specification for operating fluids sheet 236.14.
See WIS document: BB.00.40-p-0236-14a.
MB part number - A001 989 68 03 10
7-speed automatic transmission 722.9 up to transmission production date June 21, 2010
Only use the transmission oils outlined in specification sheet 236.14
See WIS document: BB.00.40-p-0236-14a.
MB part number - A001 989 68 03 10
7-speed automatic transmission 722.9 after transmission production date June 21, 2010
Only use the transmission oils outlined in specification sheet 236.15
See WIS document: BB.00.40-p-0236-15.
MB part number - A001 989 78 03 09
Mercedes Benz Truck R 320 BLUETEC
Page 91
Note:
The 2 different variants of 722.9 transmission oil are not compatible with one another and can not be mixed. The later oil can be identified by its
blue color as opposed to the former oil which is red in color.
Exception Note 1: Transmissions electrohydraulic controller units and torque converters made available through the parts department are checked at
the production plant with FE AT-134 only. This is why these parts may exhibit traces of FE ATF-134, In this case the transmission controller unit
and torque converter must not be cleaned. The transmission can be filled with the corresponding gear oil (as per this SI) immediately after it has been
installed.
Exception Note 2: Transmission 722.6, 722.9 up to transmission component serial number 2834526 may not be filled with FE~ATF 134.
Transmissions constructed after the June 21, 2010 transition can be visually identified by the following characteristics:
1. The oil pan has a noticeable change in the 4 dimples (pictured below).
2. The oil pan is 5mm deeper
3. The overflow pipe (inside the oil pan) is Green rather than black or white as on the earlier construction transmissions.
Xentry DAS version 05/2010 together with add-on 1476 displays a reference to the specified gear oil before reading out the transmission oil
temperature.
This information must be observed when filling the transmission.

COMAND(R) - NTG 4, Intermittent No audio, 'Device Unavailable' Mercedes Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985)

2010 Mercedes Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985)

Vehicle: Customer Interest

COMAND(R) - NTG 4, Intermittent No audio, 'Device Unavailable'

NTG 4 COMAND no audio on startup. Satellite Radio displays "Device Unavailable" when selected

Topic number L182.85-P-054716

Version 2

Design group 82.85 Navigation and communication Systems (CNS,

ICS, COMAND, FleetBoard)

Date 02-08-2013

Validity All Model 204, 207, 212 vehicles with NTG 4 Reason for

change noted that Xentry software newer than 09/12 will work too.

Complaint:

Intermittently, no audio from any source on startup. Satellite Radio selection displays ~Device Unavailable on the COMAND

Resetting the CAN will bring back functionality most of the time.

Cause:

SDARs software on Telematics DVD A 212 827 82 59 & A 212 827 89 59 on SDARs part number A171 870 XX XX

Remedy:

Backdate the SDAR's software using the following process:

1. Insert Telematics CD into COMAND

a. For model 212, 207 vehicles, use A 212 827 72 59

b. For model 204 vehicles, use A 204 827 95 59

2. Using Xentry software 09/2012 with Add-On 2521 or newer versions, flash the Telematics software.

Symptoms Table


-----------------------------------------------------Page 1-----------------------------------------------------