Skip to main content

Posts

Showing posts with the label TSB 13-3-13

ISSUE Some 2009-2012 F-150 vehicles built on or before 1/16/2012 may exhibit a vibration, thump or clunk noise from under the vehicle that may be more noticeable with increased road speed and driveline torque.

ISSUE Some 2009-2012 F-150 vehicles built on or before 1/16/2012 may exhibit a vibration, thump or clunk noise from under the vehicle that may be more noticeable with increased road speed and driveline torque. Technical Service Bulletin # 13-3-13 Date: 130326 Drivetrain - Under Vehicle Vibration, Thump/Clunk Noise TSB 13-3-13 03/26/13 VIBRATION/THUMP/CLUNK NOISE UNDER VEHICLE - BUILT ON OR BEFORE 1/16/2012 FORD: 2009-2012 F-150 This article supersedes TSB 13-2-13 to update the warranty causal part number. ISSUE Some 2009-2012 F-150 vehicles built on or before 1/16/2012 may exhibit a vibration, thump or clunk noise from under the vehicle that may be more noticeable with increased road speed and driveline torque. ACTION Follow the Service Procedure steps to correct the condition SERVICE PROCEDURE 2010 Ford Truck F 150 4WD V8-4.6L VIN 8        97 1. Inspect the rubber bonded joint of the driveshaft center support bearing for signs of separating from the can...

Some 2009-2012 F-150 vehicles built on or before 1/16/2012 may exhibit a vibration, thump or clunk noise from under the vehicle that may be more noticeable with increased road speed and driveline torque.

2010 Ford Truck F 150 4WD V8-4.6L VIN 8   Page 1 Vehicle: All Technical Service Bulletins Drivetrain - Under Vehicle Vibration, Thump/Clunk Noise TSB 13-3-13 03/26/13 VIBRATION/THUMP/CLUNK NOISE UNDER VEHICLE - BUILT ON OR BEFORE 1/16/2012 FORD: 2009-2012 F-150 This article supersedes TSB 13-2-13 to update the warranty causal part number. ISSUE Some 2009-2012 F-150 vehicles built on or before 1/16/2012 may exhibit a vibration, thump or clunk noise from under the vehicle that may be more noticeable with increased road speed and driveline torque. ACTION Follow the Service Procedure steps to correct the condition SERVICE PROCEDURE 1. Inspect the rubber bonded joint of the driveshaft center support bearing for signs of separating from the canister sleeve. (Figure 1) 2. Is the rubber bonded joint separating from the canister sleeve? a. Yes - replace driveshaft assembly. Refer to Workshop Manual (WSM), Section 205-01. b. No - this article does not apply. Refer to W...