Showing posts with label Audio System - RAD2(R) Programming Communication Issues. Show all posts
Showing posts with label Audio System - RAD2(R) Programming Communication Issues. Show all posts

Friday, December 7, 2018

Audio System - RAD2(R) Programming Communication Issues

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 090209 Date: 100401



Audio System - RAD2(R) Programming Communication Issues



SI B 09 02 09



Programming/Coding Explanations



April 2010



Technical Service



This Service Information bulletin supersedes SI B09 02 09 dated August 2009.



[NEW] designates changes to this revision



SUBJECT



[NEW] RAD2 Programming with ISTA/P - No MOST Communication



MODEL



E82, E88 (1 Series)



[NEW] E89 (Z4)



E90, E91, E92, E93 (3 Series)



All vehicles equipped with option 663 (Radio Professional, RAD2)



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 369



SITUATION



[NEW] When programming a RAD2-equipped vehicle produced from 03/10 on (and earlier produced vehicles with a RAD2 replacement part



manufactured from 03/10) with ISTA/P 2.37.1 or later, a message is displayed: "During control module determination, it was ascertained that control



modules connected to the MOST ring are not responding", followed by a second message that begins "The gateway GW is likely to be defective



......" The user is then asked to perform a gateway repair. After following the on-screen instructions, the measures plan directs to replace all MOST



control modules.



CAUSE



[NEW] The RAD2 GW locks up during identification with ISTA/P 2.37.1 or later, causing no communication on the MOST ring.



[NEW] PROCEDURE



To avoid the situation above, perform the following steps:



^ Only connect an ICOM-A to the vehicle (do not connect an ICOM-B).



^ Ignore the message that tells you that the MOST bus is not connected by selecting the OK button (see attachment).



^ Determine the measures plan.



Depending on the situation, follow 1) or 2) below:



1. The measures plan shows that MOST modules have to be programmed (see attachment):



^ Hook up the ICOM-B and wait until you have 2 green lights on ICOM-B. Then accept the measures plan. Programming will go through.



2. The measures plan shows no MOST modules:



^ Accept the measures plan and programming will go through (do not connect the ICOM-B).



ATTACHMENTS



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 370



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 371



view PDF attachment B090209RAD2_Workaround_ISTAP_2_34_2.