Skip to main content

Posts

Showing posts with the label TSB 10-18-6

ISSUE Some 2010 F-150 and 2011 F-Super Duty vehicles may exhibit a brake drag condition.

ISSUE Some 2010 F-150 and 2011 F-Super Duty vehicles may exhibit a brake drag condition. Technical Service Bulletin # 10-18-6 Date: 100927 Brakes - Brake Drag Condition TSB 10-18-6 2010 Ford Truck F 150 4WD V8-4.6L VIN 8        86 09/27/10 BRAKE DRAG DUE TO STOPLAMP SWITCH ADJUSTMENT FORD: 2010 F-150 2011 F-Super Duty ISSUE Some 2010 F-150 and 2011 F-Super Duty vehicles may exhibit a brake drag condition. This may be due to an improperly adjusted stoplamp switch. ACTION Follow the Service Procedure to correct the condition. SERVICE PROCEDURE 1. Put vehicle on hoist and lift all four (4) tires off the ground. Confirm brake drag by rotating front and rear wheels by hand and note whether the tires rotate freely. a. No brake drag - this procedure does not apply. b. Brake drag present - proceed to Step 2. 2. Remove the stoplamp switch. Refer to Workshop Manual (WSM), Section 417-01. a. Inspect for brake drag. If no brake drag is present reinstall the stopla...

Some 2010 F-150 and 2011 F-Super Duty vehicles may exhibit a brake drag condition. This may be due to an improperly adjusted stoplamp switch.

2010 Ford Truck F 150 4WD V8-4.6L VIN 8   Page 1 Vehicle: All Technical Service Bulletins Brakes - Brake Drag Condition TSB 10-18-6 09/27/10 BRAKE DRAG DUE TO STOPLAMP SWITCH ADJUSTMENT FORD: 2010 F-150 2011 F-Super Duty ISSUE Some 2010 F-150 and 2011 F-Super Duty vehicles may exhibit a brake drag condition. This may be due to an improperly adjusted stoplamp switch. ACTION Follow the Service Procedure to correct the condition. SERVICE PROCEDURE 1. Put vehicle on hoist and lift all four (4) tires off the ground. Confirm brake drag by rotating front and rear wheels by hand and note whether the tires rotate freely. a. No brake drag - this procedure does not apply. b. Brake drag present - proceed to Step 2. 2. Remove the stoplamp switch. Refer to Workshop Manual (WSM), Section 417-01. a. Inspect for brake drag. If no brake drag is present reinstall the stoplamp switch. The stoplamp switch must be installed with the brake pedal in the release position. b. If br...