ISSUE Some 2010 F-150 and 2011 F-Super Duty vehicles may exhibit a brake drag condition.
Technical Service Bulletin # 10-18-6 Date: 100927
Brakes - Brake Drag Condition TSB 10-18-6
2010 Ford Truck F 150 4WD V8-4.6L VIN 8 86
09/27/10
BRAKE DRAG DUE TO STOPLAMP SWITCH ADJUSTMENT
FORD: 2010 F-150 2011 F-Super Duty
ISSUE Some 2010 F-150 and 2011 F-Super Duty vehicles may exhibit a brake drag condition. This may be due to an improperly adjusted stoplamp switch.
ACTION Follow the Service Procedure to correct the condition.
SERVICE PROCEDURE
1. Put vehicle on hoist and lift all four (4) tires off the ground. Confirm brake drag by rotating front and rear wheels by hand and note whether the tires rotate freely.
a. No brake drag - this procedure does not apply.
b. Brake drag present - proceed to Step 2.
2. Remove the stoplamp switch. Refer to Workshop Manual (WSM), Section 417-01.
a. Inspect for brake drag. If no brake drag is present reinstall the stoplamp switch. The stoplamp switch must be installed with the brake pedal in the release position.
b. If brake drag is still present with the stoplamp switch removed or after reinstallation, refer to WSM, Section 206-00 for normal diagnostics.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
101806A 2010 F-150, 2011 F-Super 0.3 Hr. Duty: Remove And Install Stoplamp Switch Includes Time To Inspect (Do Not Use With Any Other Labor Operations)
DEALER CODING
CONDITION BASIC PART NO. CODE 13480 42
Technical Service Bulletin # 10-18-6 Date: 100927
Brakes - Brake Drag Condition TSB 10-18-6
2010 Ford Truck F 150 4WD V8-4.6L VIN 8 86
09/27/10
BRAKE DRAG DUE TO STOPLAMP SWITCH ADJUSTMENT
FORD: 2010 F-150 2011 F-Super Duty
ISSUE Some 2010 F-150 and 2011 F-Super Duty vehicles may exhibit a brake drag condition. This may be due to an improperly adjusted stoplamp switch.
ACTION Follow the Service Procedure to correct the condition.
SERVICE PROCEDURE
1. Put vehicle on hoist and lift all four (4) tires off the ground. Confirm brake drag by rotating front and rear wheels by hand and note whether the tires rotate freely.
a. No brake drag - this procedure does not apply.
b. Brake drag present - proceed to Step 2.
2. Remove the stoplamp switch. Refer to Workshop Manual (WSM), Section 417-01.
a. Inspect for brake drag. If no brake drag is present reinstall the stoplamp switch. The stoplamp switch must be installed with the brake pedal in the release position.
b. If brake drag is still present with the stoplamp switch removed or after reinstallation, refer to WSM, Section 206-00 for normal diagnostics.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
101806A 2010 F-150, 2011 F-Super 0.3 Hr. Duty: Remove And Install Stoplamp Switch Includes Time To Inspect (Do Not Use With Any Other Labor Operations)
DEALER CODING
CONDITION BASIC PART NO. CODE 13480 42
Comments
Post a Comment