Skip to main content

B14 (Ambient temperature display temperature sensor) : Short circuit to positive (P0073)

P0073
B14 (Ambient temperature display temperature sensor) : Short circuit to positive (P0073)
Possible cause:
­ B14 (Ambient temperature display temperature sensor)
Affected functions:
­
Engine output
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
Test 1: Ambient temperature
Test 2: Check component B14 (Ambient temperature display temperature sensor).
1. Ambient temperature
Preconditions for test Ambient temperature
Test prerequisite
10.52SS
Page 8312010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985)
Copyright ? 2013, ALLDATA
10.52SS
Page 832
­ Air filter and associated hoses are correctly fitted.
Test sequence
­ Drive vehicle with constant engine load at a speed of > 50 km/h (> 31 mph) for approx. 5 min.
Status of the relevant actual values:
­ Ambient temperature:Warning! Communication with ECU required.
­ Intake air temperature:Warning! Communication with ECU required.
Question
­
Is the temperature difference between component B14 (Ambient temperature display temperature sensor) and component B17
(Intake air temperature sensor) greater than 40? C?
YES
Test 1.1: Check component B14 (Ambient temperature display temperature sensor).
Test 1.2: Check component B17 (Intake air temperature sensor).
1.1. Check component B14 (Ambient temperature display temperature sensor).
Test prerequisite
­ Relevant fault codes exist or a complaint has been received.
Test sequence
­ Detach coupling at component B14 (Ambient temperature display temperature sensor).
­ Measure resistance with multimeter between pins (B14)1 and (B14) 2
Status of the relevant actual values:Specified value
­ Temperature0? C:Resistor= [8.0...12.0] kohms
­ Temperature10? C:Resistor= [4.5...7.0] kohms
­ Temperature20? C:Resistor= [3.0...4.5] kohms
­ Temperature30? C:Resistor= [2.0...3.0] kohms
­ Temperature40? C:Resistor= [1.3...2.0] kohms
Question:Are the measurement values OK?
YES
The measurement values are OK.Possible cause and remedy
­ Test wiring (N10/10) 3.3 ­ (B14) 2 for Short circuit or open circuit
­ Test wiring (N10/10) 3.14 ­ (B14) 1 for Open circuit
­ Component N10/10 (Driver­side SAM control module) is defective.
End of test2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985)
Copyright ? 2013, ALLDATA
10.52SS
Page 833
NO
The measurement values are not OK.Possible cause and remedy
­ Component B14 (Ambient temperature display temperature sensor) is defective.
End of test
1.2. Check component B17 (Intake air temperature sensor).
Test 1.2.1: Check component B17 (Intake air temperature sensor) using actual value.
Test 1.2.2: Check plausibility of actual value B17 (Intake air temperature sensor) in control module ME 9.7 (AMG).
Test 1.2.3: Check internal resistance of component B17 (Intake air temperature sensor).
1.2.1. Check component B17 (Intake air temperature sensor) using actual value.
Test sequence
­ Switch on ignition.
Status of relevant actual value:
­ Intake air temperature:Warning! Communication with ECU required.
Specified value
­ Current temperature in area surrounding component B17 (Intake air temperature sensor)
Question
­
Is the actual value o.k.?
YES
The actual value is okay.End of test
NO
The actual value is not o.k.Possible cause and remedy
­
­
Check plausibility of actual value B17 (Intake air temperature sensor) in control module N3/10 (ME­SFI [ME] control unit).
Check internal resistance of component B17 (Intake air temperature sensor).2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985)
Copyright ? 2013, ALLDATA
10.52SS
Page 834
1.2.2. Check plausibility of actual value B17 (Intake air temperature sensor) in control module ME 9.7 (AMG).
Test prerequisite
­ The actual value is not o.k.
Test sequence
­ Detach coupling at component B17 (Intake air temperature sensor).
­ Switch on ignition.
Status of relevant actual value:
­ Intake air temperature:Warning! Communication with ECU required.
Specified value
­
­
If the connector is unplugged at component B17 (Intake air temperature sensor), value [ ­40? C ] is displayed.
Bridge pin 1 in pin 2 at the unplugged connection of component B17 (Intake air temperature sensor).The value is approx. [ 150? C ]
for a short period of time and drops back down to the substitute value of approx. [ ­40? C ].
Question
­
Is the actual value o.k.?
YES
The actual value is okay.Further possible causes of fault
­
Check internal resistance of component B17 (Intake air temperature sensor).
NO
The actual value is not o.k.Possible cause and remedy
­ Signal wire
End of test
1.2.3. Check internal resistance of component B17 (Intake air temperature sensor).
Test sequence
­ Switch off ignition.
­ Detach coupling at component B17 (Intake air temperature sensor).
­ Measure resistance with multimeter between pins (B17) 1 and (B17) 2
Specified value
­ Resistor(20? C): [2350...2500]ohms
­ Resistor(30? C): [1600...1700]ohms
­ Resistor(40? C): [1100...1200]ohms
­ Resistor(50? C): [800...900]ohms
Question
­
Are the measurement values OK?
YES
The measurement values are OK.End of test
NO
The measurement values are not OK.Possible cause and remedy
­ B17 (Intake air temperature sensor)
End of test
NO
Ambient temperature
The temperature difference is not greater than 40 ?C.End of test
2. Check component B14 (Ambient temperature display temperature sensor).2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985)
Copyright ? 2013, ALLDATA
Test 2.1: Check component B14 (Ambient temperature display temperature sensor).
2.1. Check component B14 (Ambient temperature display temperature sensor).
Test prerequisite
­ Relevant fault codes exist or a complaint has been received.
Test sequence
­ Detach coupling at component B14 (Ambient temperature display temperature sensor).
­ Measure resistance with multimeter between pins (B14)1 and (B14) 2
Status of the relevant actual values:Specified value
­ Temperature0? C:Resistor= [8.0...12.0] kohms
­ Temperature10? C:Resistor= [4.5...7.0] kohms
­ Temperature20? C:Resistor= [3.0...4.5] kohms
­ Temperature30? C:Resistor= [2.0...3.0] kohms
­ Temperature40? C:Resistor= [1.3...2.0] kohms
Question:Are the measurement values OK?
YES
The measurement values are OK.Possible cause and remedy
­ Test wiring (N10/10) 3.3 ­ (B14) 2 for Short circuit or open circuit
­ Test wiring (N10/10) 3.14 ­ (B14) 1 for Open circuit
­ Component N10/10 (Driver­side SAM control module) is defective.
End of test
NO
The measurement values are not OK.Possible cause and remedy
­ Component B14 (Ambient temperature display temperature sensor) is defective.
End of test

Popular posts from this blog

Disc Brake Pad Set - Front - Genuine Mercedes 0084203520 Disc Brake Pad Set - Front

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts Disc Brake Pad Set - Front - Genuine Mercedes 0084203520 Disc Brake Pad Set - Front

2026 Mercedes-Benz GLB Review: Handling Dynamics Under Duress

2026 Mercedes-Benz GLB Review: Handling Dynamics Under Duress Part 7 of 10 | Is the Utility King also a True Driver's Companion? Testing its Grip, Feel, and Cornering Confidence. Many crossovers are glorified golf carts with bigger badges. The GLB dares to be different. While it embraces the boxy silhouette, its engineering guts defy that stereotype. This review pushes the GLB—from smooth suburban cruises to aggressive highway sweeps—to its limits, determining if this SUV truly offers a *driver's experience*, not just a passenger experience. [Cornering Confidence] See GLB handle tight turns like a dream! Watch our dynamic review video. The Direct Link: Steering Feel That Connects You to the Road In a vehicle designed for practicality, steering often becomes dull. The GLB avoids this trap with an electric-assisted system that feels perfectly weighted—light enough for parki...

A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts 0446 Heating of component G3/3 (Left O2 sensor, before TWC [KAT]) : Short circuit to ground (P0051)

2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948) A L L  Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts 0446 Heating of component G3/3 (Left O2 sensor, before TWC [KAT]) : Short circuit to ground (P0051) Possible cause: - G3/3 (eft O2 sensor, before TWC [KAT]) Affected functions: - Engine diagnosis - Exhaust system ------------------------------------------------   Test 1: Check component G3/3 (eft O2 sensor, before TWC [KAT]). 1. Check component G3/3 (Left O2 sensor, before TWC [KAT]). Warning!Communication with ECU required.

For BMW X5 E70 2006-2013 Electric Parking Handbrake Brake Switch Button E7CX

29,62 CAD Date de fin: dimanche sept.-22-2019 10:53:26 CEST Achat immédiat pour seulement: 29,62 CAD Achat immédiat | Ajouter à vos Affaires à suivre

The ignition coil output stage of cylinder 7 detects a line discontinuity. (P0357)

The ignition coil output stage of cylinder 7 detects a line discontinuity. (P0357) The ignition coil output stage of cylinder 7 detects a line discontinuity. (P0357) Possible cause: ­ Line from ignition coil to control unit Affected functions: ­ Engine running ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Check component T1/x (ignition coil(s)). 1. Check component T1/x (ignition coil(s)). Test 1.1: Check component T1/7 (ignition coil cylinder 7). 1.1. Check component T1/7 (ignition coil cylinder 7). Warning!Hazard as a result of high voltage at the ignition system!2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 235 ­ Electronic ignition systems operate within a hazardous power range both at the low voltage side (primary circuit) as well as on the high voltage side (secondary circuit). ­ Contacts with such parts can result in burns, heart flutter or cardiac arrest. Rules of conduct and protective measu...

Maintenance: All Technical Service Bulletins A/T - Fluid Specification Changes Date: September 1, 2011 Order No.: S-B-00.40/89b

******************************************************************** 2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948) Copyright ? 2013, ALLDATA 10.52SS Page 1 Maintenance: All Technical Service Bulletins A/T - Fluid Specification Changes Date: September 1, 2011 Order No.: S-B-00.40/89b Supersedes: S-B-00.40/89a, August 10, 2010 Group: 00 Revision b: Added exception note. SUBJECT: MY-All, Models All with Transmission 722.6 or 722.9 Operating Fluid Specification Changes for Automatic Transmission 5-speed automatic transmission 722.6 Only use the transmission oils outlined in specification for operating fluids sheet 236.14. See WIS document: BB.00.40-p-0236-14a. MB part number-A001 989 68 03 10 7-speed automatic transmission 722.9 up to transmission production date June 21, 2010 Only use the transmission oils outlined in specification sheet 236.14 See WIS document: BB.00.40-p-0236-14a. MB part number-A001 989 68 03 10 7-speed automatic transmissi...

A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts 0343

2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948)   A L L  Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts 0343 This fault can be ignored and erased. Possible cause: - This fault can be ignored and erased. Affected functions: - Engine output ------------------------------------------------   Test 1: This fault can be ignored and erased. 1. This fault can be ignored and erased. Note:This fault can be ignored and erased.

Disc Brake Pad Set - Front - Genuine Mercedes 004420072041

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts Disc Brake Pad Set - Front - Genuine Mercedes 004420072041 Disc Brake Pad Set - Front

Start enable of DAS not sent (P0513)

P0513 Start enable of DAS not sent (P0513) Possible cause: ­ A guided test is not available at present. Affected functions: ­ Electronic ignition lock / Steering lock ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Note:A guided test is not available at present. Part 1 Interval between the engine stop time signals sent through CAN­Bus from instrument cluster is too long (P2610)2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 903 Possible cause: ­ Engine compartment CAN databus Affected functions: ­ CAN Communication ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Check component A1 (Instrument cluster). Test 2: Engine compartment CAN test 1. Check component A1 (Instrument cluster). Read and process fault code from control module A1 (Instrument cluster). Possible cause and remedy ­ Read and process fault code from control module A1 (Instrument cluster). End of test 2. Engine compartment CAN test ...