Skip to main content

COMAND(R) - 'Drive Unavailable, Temp. Too High' Message

2010 Mercedes Benz Truck GL 350 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820)
Vehicle: All Technical Service Bulletins
COMAND(R) - 'Drive Unavailable, Temp. Too High' Message
COMAND APS: Fault message "Drive unavailable, temperature too low or too high"
Topic number LI82.85-P-048914
Version 1
Design group 82.85 Navigation and communication systems (CNS, ICS, COMAND, FleetBoard)
Date 02-18-2010
Validity Model 171, 230, 164, 251, 169, 245, 211, 219, 203.7 with COMAND (code 512 or 527) and code 809 or 800 (NTG2.5)
Model 463 with SA code EU1
Reason for change
Reason for block
Complaint:
Complaint 1:
At high altitudes (over approx. 3000 meters above sea-level) the navigation main menu sporadically displays the fault message "Drive unavailable,
temperature too high".
The following functions are restricted due to the shutdown of the hard drive.
- Navigation
- Voice control
- Address book
- Music register (downloaded music onto the head unit hard-drive)
- Gracenote database for identifying album, track and performer information on an audio CD
Complaint 2:
The navigation main menu permanently displays the fault message "Drive unavailable, temperature too low or too
high"
Cause:
Re 1.)
The hard drive shuts down at high altitudes (over approx. 3000 m) and when the temperature of the hard drive is high.
a) At low altitudes the message disappears and the COMAND unit (A40/3) operates without problems. This is due to a safety feature created to
protect the hard-drive from permanent damage.
b) High hard drive temperatures are increased by high volume settings especially in vehicles without sound system (SA code 810), high outside
and engine temperatures and unfavorable settings on the heating/air conditioning. With the altitude increase and decreasing of air around
hard-drive assembly, the HDD starts the shut down process as the surrounding head unit temperature also reaches around 55 degrees Celsius.
The head unit is working as specified in this use case.
Re. 2.)
There is a hardware fault in the COMAND unit (A40/3).
Remedy:
Remedy 1.)
To prevent damage to the hard drive, it is shut down at high altitudes and high temperatures. This is due to a safety feature (series production
configuration). => Do not replace any equipment!
2010 Mercedes Benz Truck GL 350 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820)
Remedy 2.)
If the fault occurs constantly, replace the COMAND APS (A40/3). Refer to EPC.
Note:
If the vehicle is fitted with a COMAND APS (A40/3) with PIN theft protection, the PIN code must be recorded in the VeDoc system. Pay attention
to the relevant information during initial startup with DAS / Xentry Diagnostics.
Symptoms
Work units
Validity

Popular posts from this blog

A/T - ECO Start/Stop Inoperative, DTC P0944 Stored In TCM ECO start/stop inoperative, fault code P0944 in transmission control unit

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts Technical Service Bulletin # LI27-57_P-0534962 Date: 120522 2010 Mercedes Benz SL 550 (230.471) V8-5.5L (273.965)   Page 29 A/T - ECO Start/Stop Inoperative, DTC P0944 Stored In TCM ECO start/stop inoperative, fault code P0944 in transmission control unit Topic number LI27.57-P-053496 Version 2 Design group 27.57 Oil pump Date 05-22-2012 Validity NAG2 FEPlus (722.9) with auxiliary oil pump with code B03 up to transmission sequence number 7.248.200 Reason for change Model series 251 deleted because model series 251 does not have ECO start/stop. Complaint: ECO start/stop inoperative, fault code P0944 in transmission control unit. Attachments Cause: Check valve in torque converter housing may be damaged. Leakage between torque converter housing and auxiliary oil pump. May affect transmissions with transmission sequence numbers starting with -07-xxx xxx. Remedy: Access v...

Relay 'Circuit 87' ( Engine ) (P2505)

P2505 Relay 'Circuit 87' ( Engine ) (P2505) Possible cause: ­ N3/10 (ME­SFI [ME] control unit) ­ K40/4kK (Engine electronics and chassis relay) Affected functions: ­ Battery / On­board electrical system ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Check power supply of component N3/10 (ME­SFI [ME] control unit). Test 2: Arrangement of fuses Page 2562010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 257 1. Check power supply of component N3/10 (ME­SFI [ME] control unit). Test 1.1: Test voltage supply of circuit 87. 1.1. Test voltage supply of circuit 87. Figure legend ­ A ­ConnectionTest cable 35­pin socket box ­ 001 ­Sockets of component N3/10 (ME­SFI [ME] control unit) ­ 05 ­35­pin socket box ­ 050 ­126­pin socket box ­ 108 ­Test cable 266 589 01 63 00 ­ N3/10 (ME­SFI [ME] control unit) ­ II 1­63ConnectionTest cable ­ III 64­126ConnectionTest cable Warning! ­ ­ Connection A of test ca...

2017 Mercedes-Benz GLS GLS550

2017 Mercedes-Benz GLS GLS550 17 MB GLS550-Blk/Espresso-Driver Assistance Pkg-Pano Sunroof-1Owner-Clean Carfax Year Make Model Mileage 2017 Mercedes-Benz GLS GLS550 14,121 Exterior Interior Stock # VIN Obsidian Black Metallic Ginger Beige/Espresso S-1752 4JGDF7DE3HA775649 Engine 4.7L Biturbo V8 Engine Carfax View Free CarFax Report Carfax Highlights View Carfax Report Not all accidents or other issues are reported to CARFAX. The number of owners is estimated. See the full CARFAX Report for additional information and glossary of terms. Carfax Highlights No Accidents / Damage Reported to CARFAX No Airbag Deployment Reported to CARFAX Vehicle Qualifies for the CARFAX Buyback Guarantee No Structural/Frame Damage Reported to CARFAX No Manufacturer Recalls Reported to CARFAX No Indication of an Odomete...

2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948) A L L Diagnostic Trouble Codes ( DTC ): P Code Charts P1240

2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948)     A L L  Diagnostic Trouble Codes ( DTC ): P Code Charts P1240 The CAN bus is malfunctioning.   Test 1: Check the CAN communication with control unit Engine control module.   Test 2: Possible cause: - Drive train CAN bus Affected functions: - Engine diagnosis - Fuel system 1. Check the CAN communication with control unit Engine control module. Important note A CAN timeout fault code is set due to the absence of a CAN input signal.The cause of this may be not only the transmitter control unit, but also the CAN networking.Possible cause and remedy - Check CAN communication with affected control unit. - Check other control units for vehicle CAN bus failure in the stored faults. - CAN bus has loose contact or Open circuit. Continue with button F 2 Warning!Communication with ECU required. 2. No further information available.

Meguiar's Ultimate Compound - Oxidation, Swirl Marks, Water Spots and Scratches Remover - G17216C

Meguiar's Ultimate Compound Review: Effective Paint Correction for Oxidation, Swirl Marks, Water Spots, and Light Scratches The Meguiar's Ultimate Compound is one of the brand’s best-known paint correction products, designed to remove oxidation, swirl marks, water spots, and surface blemishes while restoring clarity and gloss. Meguiar’s describes it as a clear-coat-safe formula that uses micro-abrasive technology to cut quickly without the heavy scratching and haze often associated with older rubbing compounds. ([meguiars.com](https://www.meguiars.com/automotive/products/meguiarsr-ultimate-compound-g17216-152-oz-liquid?utm_source=openai)) For drivers who want to revive dull or neglected paint without jumping straight to professional detailing, this product sits in a very practical middle ground. It is stronger than a basic polish, but still intended to be safe and approachable for enthusiasts working by hand or with a dual-action polisher. Meguiar’s says it can be used o...

2024 Toyota Tacoma X-Runner Concept

Toyota Unveils the Future of Off-Roading with the 2024 Tacoma X-Runner Concept PLANO, Texas (February 12, 2023) – Toyota is thrilled to introduce the latest addition to its rugged off-road lineup: the 2024 Tacoma X-Runner Concept. This highly anticipated concept vehicle was unveiled today at the Chicago Auto Show, giving enthusiasts a glimpse into the future of extreme off-roading. “The Tacoma X-Runner Concept represents the ultimate fusion of power, capability, and agility,” said Bob Carter, Executive Vice President of Sales, Toyota Motor North America. “We’ve taken everything our customers love about the Tacoma and amplified it to create a truly exceptional off-road experience.” Design and Features The Tacoma X-Runner Concept is built upon the proven foundation of the fifth-generation Tacoma, but takes its capabilities to new heights. Its muscular stance and aggressive styling make a bold statement, while the elevated ride height and beefy tires give it the clearance and traction nee...

Crimson Halter Prime Bikini

To help restrain the price of the insurance must you be taking out each materials and buildings cowl you might want to obtain each plans with the similar supplier. The fungis succeeds together with flourishes with moisture material in addition to filth and you need to definitely make positive you bath your current foot continuously as quickly as you return residence out of work. This resulted in a medium mud materials with good lifetime and minimal rotor wear. Select the latest model: Good corporations will no doubt provide their shoppers the latest fashions of trailers. Passenger models gain OnStar with turn-by-turn navigation, while cargo vans acquire LED lighting for the cargo area. Look out for a laptop repair Hawaii Company that has a lot of shoppers. A assured person will have the ability to say what they want every time they're having fun with a day out with the sugar mamas. Some winter nights we wake up and we're chilled and toes cramping from being out facet the blanke...

How to Replace Relay Circuit 87 for Your Engine

How to Replace Relay Circuit 87 for Your Engine Relay circuit 87 is a crucial component that powers up the engine control unit (ECU) and other systems of your car. If this relay fails, you may experience problems with starting, running, or shutting off your engine. In this blog post, we will show you how to diagnose and replace relay circuit 87 for your engine. What is Relay Circuit 87? Relay circuit 87 is a 12-volt switch that connects power from the battery to the ECU and other components of your engine. It is usually located in the fuse box under the hood or near the battery. Relay circuit 87 is activated by the ECU when it receives a signal from the ignition switch or the keyless entry system. Why Do You Need to Replace Relay Circuit 87? Relay circuit 87 can fail due to various reasons, such as corrosion, wiring damage, power surge, or faulty ECU. Some of the symptoms of a bad relay circuit 87 are: - The engine does not start or cranks but does not fire up. - The engine s...

2018 Mercedes-Benz C300 Coupe Check

Touch Shift allows the driver to manually choose all ahead speeds by pushing the gear lever slightly left or proper to downshift or upshift whereas within the "Drive" selector place. Its security internet will get more protective, with hardware lifted right from the E-Class and S-Class. It was once that a two-door was cheaper than the equivalent 4-door, however now they often cost extra. With Mercedes-Benz of Wilmington, it can save you on a certified pre-owned Mercedes-Benz throughout our gross sales occasion happening now. Beneath you can browse the current inventory of used Mercedes-Benz C300 navigation techniques bought by main salvage yards throughout the United States. How do i connect my iphone 4s music by way of bluetooth on my 2008 mercedes benz c300 4matic sport/luxury with no navigation? Mercedes c300 2011 usbHow do i import contacts to mercedes c300 2011 iphone? Buy The 2010 Mercedes Benz C300 Hood With Confidence? 32% - Is there a bluetooth puck i can connect wit...

B28 (Pressure sensor) : Short circuit to positive or open circuit (P0108)

P0108 B28 (Pressure sensor) : Short circuit to positive or open circuit (P0108) Possible cause: ­ B28 (Pressure sensor) Affected functions: ­ Engine output ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Check component B28 (Pressure sensor). 1. Check component B28 (Pressure sensor). Test 1.1: Check component B28 (Pressure sensor) using actual value. Test 1.2: Test signal voltage of component B28 (Pressure sensor). Test 1.3: Check power supply of component B28 (Pressure sensor). 1.1. Check component B28 (Pressure sensor) using actual value. Test sequence 10.52SS Page 3682010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS ­ Switch on ignition. Status of relevant actual value: ­ Intake manifold pressure (ADC):Warning! Communication with ECU required. Specified values ­ Intake manifold pressure,Ignition ON: > 3.5 V ­ Intake manifold pressure,Operate engine at idling speed.:< 2 V Question ­ Is the actua...