Mercedes Benz Truck R 320 BLUETEC Technical T-54_21-220 Date: 090508
Body Controls - Rear Lamp Out Mssg/Multiple Codes Set
Date: May 8, 2009
Order No.: T-B-54.21/220
Supersedes:
Group: 54
Mercedes Benz Truck R 320 BLUETEC
Page 260
SUBJECT:
Model 164.125/156/172/177/186/825/871/886, Up to VIN A490836
Model 251.125/156/165, Up to VIN A096091
Equipped with SA code 809 (Model Year 2009)
Rear Lamp Out Message(s) in Instrument Cluster But No Failures Exist
If you receive customer reports in the above model vehicles of a rear lamp out message in the instrument cluster but no bulb failures exist, this may
be due to a software issue in the rear SAM. This issue will only occur under all the following conditions:
^ Rear SAM with s/w version A164 442 38 00
^ Any one of the fault codes listed above present in the Rear SAM but no bulb failure exists
To resolve, using SDS version 03/09 or later, flash the rear SAM via menu path: Control units --> Body --> Rear SAM --> Control unit adaptations
--> Control module programming
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
May 8, 2009. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In Case of Warranty, use the table above.
Body Controls - Rear Lamp Out Mssg/Multiple Codes Set
Date: May 8, 2009
Order No.: T-B-54.21/220
Supersedes:
Group: 54
Mercedes Benz Truck R 320 BLUETEC
Page 260
SUBJECT:
Model 164.125/156/172/177/186/825/871/886, Up to VIN A490836
Model 251.125/156/165, Up to VIN A096091
Equipped with SA code 809 (Model Year 2009)
Rear Lamp Out Message(s) in Instrument Cluster But No Failures Exist
If you receive customer reports in the above model vehicles of a rear lamp out message in the instrument cluster but no bulb failures exist, this may
be due to a software issue in the rear SAM. This issue will only occur under all the following conditions:
^ Rear SAM with s/w version A164 442 38 00
^ Any one of the fault codes listed above present in the Rear SAM but no bulb failure exists
To resolve, using SDS version 03/09 or later, flash the rear SAM via menu path: Control units --> Body --> Rear SAM --> Control unit adaptations
--> Control module programming
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
May 8, 2009. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
In Case of Warranty, use the table above.
