E1924
One or more signals sent from control unit N47-5 (ESP control unit) via the CAN bus is implausible.
Possible cause:
- N47-5 (ESP control unit)
Affected functions:
- CAN Communication
- Drive position selection
-------------------------------------------------
Test 1: Check the CAN communication with control unit N47-5 (ESP control unit). Test 2: Chassis CAN test
Test 3: Fault in CAN communication with control unit N47-5 (ESP control unit).
Check the CAN communication with control unit N47-5 (ESP control unit). Warning!Communication with ECU required.
Chassis CAN test
Warning!Communication with ECU required.
Fault in CAN communication with control unit N47-5 (ESP control unit).
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING- This is not a function error of control module A80 (Intelligent servo module for DIRECT SELECT) and does not justify replacement.Possible cause for the entry of this event code
- Operational fault of component N47-5 (ESP control unit) Possible measures
- Read out fault memory of control unit N47-5 (ESP control unit).
- Process displayed fault codes in control module N47-5 (ESP control unit).End of test
No comments:
Post a Comment