Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts
Technical Service Bulletin # LI58-40_P-048526 Date: 091125
Computers/Control - DAS/XD Add-On 2009-09-28-1266
DAS/XD ADD-ON 2009-09-28-1266 FOR PASSENGER CARS
Topic number LI58.40-P-048526
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 11-25-2009
Validity DVD version 09/2009
Reason for change
Reason for block
Complaint:
CDID2
Model series: 204, 212
DAS personalizing cannot be performed
MCMSFL221 / MCMSFR221
Model series: 221 model ref. pkge.
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 245
Multicontour seat fails during air release procedure. The system becomes operational again after an ignition change.
Fault code 9E8900 is stored.
TV tuner
Model series: 221, 216
Notes adjusted with respect to. coding/extended options. Required in case of replacement of TV-05 (221) with TV-09 (221 model refinement
package).
SRS/airbag
Model series: X204
FC A208 cannot be erased even when stored.
ME
Model series: 204, 207, 212
Control unit programming for software 0094487540 reports: "The following control unit software versions are available for control unit
programming: 0094487540" After control unit programming, the control unit cannot be started up.
DTR
Model series: 221, 216
Control unit programming for hardware object number 2125450416 reports:
"The following control unit software versions are available for control unit programming: 2214420956" The control unit cannot be programmed."
CDI 5
Model series: 211
Control unit programming for software object number 010 448 51 40 reports: "No newer control unit software found".
ME
Model series: 451
Control unit programming for software object numbers 033 447 24 02 and 017 448 27 02 reports: "No newer control unit software found".
ME 9.7
Model series: 221
Control unit programming for several software object numbers reports: "No newer control unit software found".
ESP
Model series: 230
Control unit programming for software object numbers 230 448 02 02 and 211 448 08 02 reports: "No newer control unit software found".
ME 9.7
Model series: 219, 171
Control unit programming for hardware object number 0034467640 reports: "Control unit software versions are available for control unit
programming". After control unit programming, the control unit cannot be started up.
ETC
Model series: 204
Control unit programming for software object number 002 448 48 10 reports: "No newer control unit software found".
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 246
DCU-RF
Model series: 221
Control unit programming for hardware object number 221 870 96 91 reports: "Control unit software versions are available for control unit
programming". After control unit programming, the control unit cannot be started up.
ETC
Model series: 207
Control unit programming for software object number 002 448 54 10 reports: "No newer control unit software found".
ME9.7 (AMG)
Model series: 216, 221, 230
Control unit programming for several software object numbers reports: "No newer control unit software found".
ETC
Model series: 164, 251
The new transmission control unit VGS3NAG2 could not previously be programmed.
All flashable CUs
Model series: 204, 207, 212
FDOK redocumentation of CVN is not performed during SCN coding - SCN coding on vehicles with China variant of COMAND not possible. -
Enabling offline control unit programming not possible.
SIM271DE20
Model series: 204, 207, 212
SCN is not written during SCN coding
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-09-28-1266 for passenger cars:
This add-on can be installed over DAS/XD version 09/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 247
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 248
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 249
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 250
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 251
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 252
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 253
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 254
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 255
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 256
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 257
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 258
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 259
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 260
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 261
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 262
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 263
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 264
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 265
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 266
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 267
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 268
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 269
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 270
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 271
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 272
Control unit/fault code
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 273
Mercedes Benz Diagnostic and Repair Information ,Wiring Diagrams. DTC. TSB. Types: TSB, DTC, Wiring Diagrams, OEM Procedures. Trusted by more than 400,000 technicians. OEM accurate fix for faster repairs. Repair Procedures and Labor Times. Factory Auto Repair info. Request A Demo Today. Factory-Correct Diagrams. Factory Part Numbers. Maintenance Schedules. Repair Procedures. Labor Times. Types: TSB, DTC.Mercedes,Mercedes,Benz,Mercedes-Benz UK,A,Class,B,Class,C,Class,E,Class,CLA,CLS,G,Class,GLA,A