2010 Cadillac Truck SRX FWD V6-3.0L Page 2135

2010 Cadillac Truck SRX FWD V6-3.0L Page 2135

DTC P2762 is a Type C DTC.

P2763

* DTC P2763 is a Type A DTC.

* The TCM inhibits 6th gear.

* The TCM commands the hot mode shift pattern.

* The TCM inhibits Tap Up/Down function.

* The TCM inhibits manual shifting of forward gears.

P2764

* DTC P2764 is a Type A DTC.

* The TCM inhibits TCC.

* The TCM freezes transmission adaptive functions.

* The TCM commands maximum line pressure.

* The TCM inhibits Tap Up/Down function.

* The TCM inhibits manual shifting of forward gears.

* The TCM limits the transmission to reverse and 5th gear.

* The TCM commands the high side driver OFF.

Conditions for Clearing the DIC/DTC

* DTC P2762 is a Type C DTC.

* DTCs P2763 and P2764 are Type A DTCs.

Reference Information

Connector End View Reference

* Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)

* Inline Harness Connector End Views (See: Diagrams/Connector Views/Multiple Junction Connector/Connector End Views By Number)

Description and Operation

Transmission General Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/6T70/6T75 -

Automatic Transmission/Transmission General Description)

Electrical Information Reference

* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit

Testing/Circuit Testing)

* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic

Procedures/Connector Repairs/Connector Repairs)

* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General

Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)

* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring

Repairs/Wiring Repairs)

DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code

(DTC) Type Definitions)

Scan Tool Reference

Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information

Special Tools

DT-47825-20 Adapter Harness

Circuit/System Verification

1. Operate the vehicle in second gear long enough to ensure at least a 3掳C (5掳F) rise in TCM temperature.

2. Operate the vehicle in drive range and ensure TCC is commanded ON for 1 minute. Verify with a scan tool the following test status

parameters display OK:

* TCC PC Sol. Perf. Test Status

* TCC PC Sol. Ctrl. Ckt. High Voltage Test Status

* TCC PC Sol. Ctrl. Ckt. Low Voltage Test Status

3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the

conditions that you observed from the Freeze Frame/Failure Records data.