2010 Cadillac CTS Sedan AWD V6-3.6L Page 792

2010 Cadillac CTS Sedan AWD V6-3.6L Page 792



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptors



DTC P0090



- Fuel Pressure Regulator Control Circuit



DTC P0091



- Fuel Pressure Regulator Control Circuit Low Voltage



DTC P0092



- Fuel Pressure Regulator Control Circuit High Voltage



DTC P00C8



- Fuel Pressure Regulator High Control Circuit



DTC P00C9



- Fuel Pressure Regulator High Control Circuit Low Voltage



DTC P00CA



- Fuel Pressure Regulator High Control Circuit High Voltage



Diagnostic Fault Information



Circuit/System Description



High pressure fuel is regulated by the high pressure fuel pump actuator, which is a part of the high pressure fuel pump. The high pressure fuel pump



actuator is a solenoid valve. The ECM provides battery voltage on the actuator high control circuit and ground on the actuator low control circuit.



Both circuits are controlled through output drivers within the ECM. When deactivated, both drivers are disabled. When activated, the high control



circuit driver energizes the high pressure fuel pump actuator and the low control circuit driver pulse-width modulates (PWM) the low control circuit



to ground. The ECM monitors the voltage on the circuits to detect a failure.



Conditions for Running the DTC



* The ignition voltage is between 11-18 V.



* The DTCs run continuously within the enabling conditions.



Conditions for Setting the DTC



P0090



* The ECM detects an open circuit in the high pressure fuel pump actuator low control circuit.



* The DTC sets when the above condition is present for 4 s.



P0091



* The ECM detects a short to ground in the high pressure fuel pump actuator low control circuit.



* The DTC sets when the above condition is present for 4 s.



P0092



* The ECM detects a short to voltage in the high pressure fuel pump actuator low control circuit.



* The DTC sets when the above condition is present for 4 s.



P00C8



* The ECM detects an open circuit in the high pressure fuel pump actuator high control circuit.



* The DTC sets when the above condition is present for 4 s.



P00C9



* The ECM detects a short to ground in the high pressure fuel pump actuator high control circuit.



* The DTC sets when the above condition is present for 4 s.



P00CA



* The ECM detects a short to voltage in the high pressure fuel pump actuator high control circuit.



* The DTC sets when the above condition is present for 4 s.



Action Taken When the DTC Sets

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

The BMW M5 Sedan & M5 Touring with BMW M Performance Parts.