Wednesday, September 16, 2020

2010 Cadillac CTS Sedan AWD V6-3.0L Page 1641

2010 Cadillac CTS Sedan AWD V6-3.0L Page 1641



* DTC P0756 is a Type A DTC.



* The TCM inhibits TAP function.



* The TCM inhibits TCC.



* The TCM freezes transmission adaptive functions.



* The TCM commands high line pressure.



* The transmission defaults to Park, Reverse, Neutral, or 2nd gear.



Conditions for Clearing the DTC



DTC P0756 is a Type A DTC.



Diagnostic Aids



Before performing a road test, configure and setup the scan tool for snapshot mode. This will allow you to display, monitor, and verify multiple



transmission data parameters at one time, after the road test.



Reference Information



Schematic Reference



Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams)



Description and Operation



* Electronic Component Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and



Operation/Electronic Component Description)



* Transmission Component and System Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and



Operation/Transmission Component and System Description)



* Transmission General Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and



Operation/Transmission General Description)



* Park - Engine Running (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Park - Engine



Running)



* Reverse (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Reverse)



* Neutral - Engine Running (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Neutral -



Engine Running)



* Drive Range, First Gear Engine Braking (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and



Operation/Drive Range/First Gear Engine Braking)



* Drive Range, First Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive Range/First



Gear)



* Drive Range, Second Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive



Range/Second Gear)



* Drive Range, Third Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive



Range/Third Gear)



* Drive Range, Third Gear Default (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive



Range/Third Gear Default)



* Drive Range - Fourth Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive



Range/Fourth Gear)



* Drive Range, Fifth Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive



Range/Fifth Gear)



* Drive Range, Fifth Gear Default (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive



Range/Fifth Gear Default)



* Drive Range, Sixth Gear (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Drive



Range/Sixth Gear)



* Fluid Passages (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/Fluid Passages)



DTC Type Reference



Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code



(DTC) Type Definitions)



Scan Tool Reference



Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information



Special Tools



* DT-47825 - Control Solenoid Test Plate



* J 21867 - Pressure Gauge



For equivalent regional tools, refer to Special Tools (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Tools and Equipment).



Circuit/System Verification

No comments:

Post a Comment