2020 BMW 128i Coupe (E82) L6-3.0L (N51) Diagnostic Trouble Codes ( DTC ): Service instruction
none
2C3D - P2243 (DME)
2C3D - P2243
Information saved in
DME
Fault code
2C3D - P2243
Fault text
Oxygen sensor before catalytic converter, line fault
Fault description
O2 Sensor Reference Voltage Circuit/Open (Bank 1 Sensor 1)
Condition for fault identification
Test condition:
O2 sensor wiring monitor (heater)
O2 sensor temperature is too low and the sensor signal is implausible
No fault memories
Terminal condition: Terminal 15, engine on Voltage condition:
none
Condition for fault memory entry
Sensor temperature < 680 锟斤拷C and sensor voltage < 0.2 V with oscillator deactivated
Action in service
Visual inspection of wires, DME plug and O2 sensor for damage
Inspect wires
Check plug-in connections DME <=> Wiring harness
<=> Upstream (pre-cat) O2 sensor for Bank 1 (water or corrosion in plug?) => Repeatedly disconnect the plug and then FIRMLY press it back in)
Replace O2 sensor
Replace DME
Fault effect and breakdown warning
Driver information Warning light: MIL ON
No comments:
Post a Comment