2020 BMW 128i Coupe (E82) L6-3.0L (N51) Diagnostic Trouble Codes ( DTC ): Service instruction
none
2D1F
2D1F - P2120
Information saved in
DME
Fault code
2D1F - P2120
Fault text
Accelerator-pedal module, pedal-position sensor potentiometer, signal
Fault description
Throttle/Pedal Position Sensor/Switch 'D' Circuit
Condition for fault identification
Test condition:
Pedal-position sensor monitor Terminal condition: Terminal 15 ON Voltage condition:
Voltage in onboard electrical system >= 10 V
Condition for fault memory entry
0.02 sec.
Action in service
Read out the two root faults from the control module's fault memory
Process using prescribed test plan,
Check main relay and overall vehicle electrical system voltage supply,
Replace DME
Fault effect and breakdown warning
Driver information
Warning light:
CC status report: Reduced engine power!
EML ON, MIL ON, PW = 0, fast idle when brake pedal is not depressed
No comments:
Post a Comment