Monday, July 29, 2019

Disclaimer2010 Land Rover LR4 (LA) V6-4.0L Technical Service Bulletin # TECLTB003673 Date: 120125

Disclaimer2010 Land Rover LR4 (LA) V6-4.0L Technical Service Bulletin # TECLTB003673 Date: 120125



Surround Camera System - Overlay Harness Installation



LTB00367NAS3



25 JAN 2012



ISSUE '3' CHANGES ARE HIGHLIGHTED IN GRAY



SECTION: 418



2010 Land Rover LR4 (LA) V6-4.0L Page 35



Surround Camera System Coax Harness Overlay Installation



AFFECTED VEHICLE RANGE:



CONDITION SUMMARY:



Situation:



On vehicles fitted with the Surround Camera System (not vehicles fitted with Parking Aid - Rear View Camera only), the camera image may be lost



and a blue screen is displayed. This may be caused by signal loss from poor connections, harness routing and excessive bending, the harness being



tightly clamped, and damage to the insulation.



NOTE



2010 Land Rover LR4 (LA) V6-4.0L Page 36



PARTS:



TOOLS:



Refer to Workshop Manual for any required special tools



WARRANTY:



NOTE:



Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.



Always refer to DDW to obtain the latest repair time.



2010 Land Rover LR4 (LA) V6-4.0L Page 37



DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.



Normal Warranty policies and procedures apply



REPAIR PROCEDURE



INSTALL SURROUND CAMERA SYSTEM PARKING AID COAX OVERLAY HARNESS



1. Refer to Workshop Manual, section 418-02: wiring Harnesses, and replace the affected Parking Aid camera wiring harness(es).

No comments:

Post a Comment