Thursday, July 25, 2019

Disclaimer2010 Land Rover LR2 (LF) L6-3.2L Technical Service Bulletin # TECLTB00255 Date: 100219

Disclaimer2010 Land Rover LR2 (LF) L6-3.2L Technical Service Bulletin # TECLTB00255 Date: 100219



Body - Front Door Interior Handle Cable Clip



No.: LTB00255



Issue: 1



Date: 19 FEB 2010



SECTION: 501



Front Door Latch Interior Release Cable End Clip - Revised Part



Availability



AFFECTED VEHICLE RANGE:



CONDITION SUMMARY:



Situation:



A revised front door latch interior release cable end clip is now available. The revised cable end clip lessens the risk of repeat repair and will ensure



the repair is completed right the first time.



Action:



In the event it becomes necessary to replace a front door latch interior release cable end clip, refer to the Repair Procedure outlined below.



PARTS:



TOOLS:



Refer to Workshop Manual (GTR) for any required special tools



WARRANTY:



2010 Land Rover LR2 (LF) L6-3.2L Page 73



NOTE:



Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.



Always refer to DDW to obtain the latest repair time.



DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.



Normal warranty policy and procedures apply.



REPAIR PROCEDURE



REPLACE DOOR LATCH CABLE END



NOTE:



Global Technical Reference (GTR) lookup sequence is as follows:



GTR Home > NAS > LF - LR2 > Service Information> Model Year > Workshop Manual



1. Refer to Workshop Manual (GTR) section 501-05, Interior Trim and Ornamentation, and remove the interior front door trim panel.



2. Remove the existing cable end clip. (Figure 1)



3. Install the new cable end clip. (Figure 2)



4. Refer to Workshop Manual (GTR) section 501-05 Interior Trim and Ornamentation and install the interior front door trim panel.

No comments:

Post a Comment