2020 BMW 128i Coupe (E82) L6-3.0L (N51) Diagnostic Trouble Codes ( DTC ): Service instruction
none
2E1D
2E1D - P1306
Information saved in
DME
Fault code
2E1D - P1306
Fault text
Firing, cylinder 6
Fault description
Ignition Monitoring Cylinder 6 Spark Duration Too Short
Condition for fault identification
Test condition:
Engine on, start phase completed, crankshaft absolves 48 revolutions after start (corresponding to approximately 5 sec. at idle), dual ignition off, secondary sparks off Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system > 11 V
Condition for fault memory entry
Segment synchronization
Action in service
Check wiring harness, ground connection and plug-in contacts. Visual inspection of spark plug, ignition coil (replace if damaged). After excluding all of these faults from consideration replace the control module.
Fault effect and breakdown warning
Driver information Warning light: none
No comments:
Post a Comment