2020 BMW 128i Coupe (E82) L6-3.0L (N51) Diagnostic Trouble Codes ( DTC ): Service instruction
none
2D20
2D20 - P2138
Information saved in
DME
Fault code
2D20 - P2138
Fault text
Accelerator-pedal module, pedal-position sensor, plausibility between signal 1 and signal 2
Fault description
Throttle/Pedal Position Sensor/Switch 'D' / 'E' Voltage Correlation
Condition for fault identification
Test condition:
Pedal-position sensor monitor Terminal condition: Terminal 15 ON Voltage condition:
Voltage in onboard electrical system >= 10 V
Condition for fault memory entry
0.02 sec.
Action in service
1) Check: Pedal-position sensor voltages [Pot voltage 2 = (Pot voltage1)/2]2)
Check wires from DME to PWG,
Visual inspection of plug terminals (on components, wiring harness and DME),
Replace PWG
Fault effect and breakdown warning
Driver information
Warning light:
CC status report: Reduced engine power!
EML ON restricted PW gradient and PW limit via rpm
No comments:
Post a Comment