@Technical Service Bulletin # Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) LI72-00_P-055756 Date: 130314
Body - Front/Rear Door Seal Loose
Door seal on front door/rear door loose
Topic number L172.00-P-055756
Version 1
Design group 72.00 General
Date 03-14-2013
Validity W/S 204
Model series 212
Model series 218
Reason for change
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 451
Complaint:
- Door frame seal loose
- Door frame seal protrudes from bodyshell
Attachments
Cause:
Insufficient adhesion between adhesive strip of door frame seal and paint surface.
Remedy:
Situation 1:
Door frame seal is loose over a length less than 20cm (Figure 1):
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 452
- Partially tape down door frame seal to body using suitable adhesive tape to allow a gap for the repair adhesive to be more easily applied (Figure
2).
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 453
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 454
- Thinly coat the entire surface of the affected area of the door frame seal (only the surface of the adhesive tape) and the affected paint surface with
repair adhesive using a spatula (Figures 3 and 4).
- Allow a minimum flash-off time of 25 minutes so that the adhesive surface is sufficiently dry (check by touching the adhesive - it must be dry
and no longer tacky).
- Then join the two adhesive surfaces together under pressure (contact adhesive), without separating or repositioning the door seal.
- To achieve optimal adhesion the doors must not be closed for 20 minutes after applying the repair adhesive.
Situation 2:
Door frame seal is loose over a length of more than 20 cm:
- Replace door frame seal on front door.
or
- Replace door frame seal on rear door.
- The new door frame seal must always be pressed on firmly after installation using a roller.
Attachments
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 455
No comments:
Post a Comment