Brakes - Brake Vibration On Front Axle X204 brake wear sensor fault message

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts

Technical Service Bulletin # LI42-10_P-054524 Date: 120905
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 37
Brakes - Brake Vibration On Front Axle
X204 brake wear sensor fault message
Topic number LI42.10-P-054515
Version 1
Design group 42.10 Service brake
Date 09-05-2012
Validity X204
Reason for change
Complaint
The brake wear indicator in the instrument cluster lights up because of a brake wear sensor fault message.
Cause
An insufficient gap between the pad backing plate and the wear sensor connector (see picture_1) means that, as wear on the brake pad increases, the
wear sensor connector is pried out by the pad backing plate and consequently the connection is broken.
File Designation
Remedy
Remove edge on rear part of the connector (see picture_2).
Note:
Make sure that the lines are not damaged here!
File Designation
Symptoms
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971)   Page 38

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

The BMW M5 Sedan & M5 Touring with BMW M Performance Parts.