Saturday, July 27, 2019

2019 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)Technical Service Bulletin # LI27-00_P-0485525 Date: 120917

2019 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)Technical Service Bulletin # LI27-00_P-0485525 Date: 120917



A/T - 2-3 Upshift Slip During Initial Cold Acceleration



2-3 upshift slips slightly one time



Topic number LI27.00-P-048552



2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898) Pag



Version 5



Design group 27.00 General



Date 09-17-2012



Validity Transmission 722.9 with engines 273, 272 and 642



Reason for change Model designations with engine 642 and engine 272 for which there is a remedy have been added under Validity



Complaint:



After a cold start, slight slippage may occur in the 2-3 shift when the vehicle moves off for the first time.



Cause:



A full basic charge for the K1 piston cannot be guaranteed with a cold start. This means that the plate contact pressure must still be built up, which



can lead to a single brief slip of the gearshift.



Remedy:



Vehicles with engine 272, engine 273 and engine 642 in combination with the electrohydraulic controller unit A220 270 23 06 or A220 270 24 06



-> Flash transmission control unit.



Important:



Observe the list in the attachment for vehicles with engine 272 and engine 642 because this software is only available for these model designations.



Attachments



Symptoms



Work units



Attachment



2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)



Page 26



2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)



Page 27



2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)



Page 28



Overview for GI27.00-P-046507

No comments:

Post a Comment