Sunday, December 23, 2018

Campaign - Face Of Speedometer May Become Detached

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 620410 Date: 100801



Campaign - Face Of Speedometer May Become Detached



SI B 62 04 10



Instruments



August 2010



Technical Service



PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES THE NEXT TIME THEY



ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS AND PRIOR TO RETAIL DELIVERY.



SUBJECT



Service Action: Replace Instrument Cluster



MODEL



E92, E93 (3 Series)



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 376



SITUATION



The dial face of the speedometer may become detached at the outer edge, and this affects the illumination of the speedometer when driving at night.



The functionality of the speedometer pointer is not affected.



CAUSE



Manufacturing error



AFFECTED VEHICLES



This Service Action involves E92 and E93 (3 Series) which were produced from May 14, 2010 to June 10, 2010.



In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar



label for code number 570. If code number 570 has been punched out, the campaign has already been performed. If code number 570 has not been



punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader. Based on the



response of the system, either proceed with the corrective action or take no further action.



PROCEDURE



Remove and replace the instrument cluster. Refer to Repair Instruction REP 62 11 280.



Program and code the complete vehicle using ISTA/P.



Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.



For information on programming and coding with ISTA/P, refer to Centernet / Aftersales Portal / Service / Workshop Technology / Vehicle



Programming.



PARTS INFORMATION



LABEL INSTRUCTIONS



This Service Action has been assigned code number 570. After the vehicle has been checked and/or corrected, obtain a label (SD 92-380) and;



A. Emboss your BMW center warranty number in the middle of the label (1);



B. Punch out code number 570 (2), printed on the label; and



C. Affix the label to the B-Pillar as shown.



If the vehicle already has a label from a previous Service Action/Recall Campaign, affix the new label next to the old one. Do not affix one label on



top of another one, because a number from an underlying label could appear in the punched-out hole of the new label.



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 377

No comments:

Post a Comment