Friday, December 28, 2018

Campaign - DCT Software Updates

2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) Technical Service Bulletin # 280110 Date: 110601



Campaign - DCT Software Updates



SI B28 01 10



Double-clutch Transmission with Drivelogic



June 2011



Technical Service



This Service Information bulletin supersedes SI B28 01 10 dated September 2010.



PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED VEHICLES THE NEXT TIME THEY



ARE IN THE SHOP FOR MAINTENANCE OR REPAIRS AND PRIOR TO RETAIL DELIVERY.



[NEW] designates changes to this revision



SUBJECT



Service Action: Program Control Units (DCT)



MODEL



E82, E88, E89, E90, E92, E93 vehicles with DCT transmission (option code 2MK) produced from 1/08/2008 to 8/31/2010



SITUATION



Due to errors in the diagnostic software of the DCT (Dual Clutch Transmission) module, the "Freeze frame data" of the DCT memory can not be



read out when using aftermarket scan tools.



CAUSE



DCT software error



AFFECTED VEHICLES



[NEW] This Service Action involves E90, E92 and E93 M3 vehicles with the S65 engine and DCT transmission and E82, E88, E89, E92 and E93



vehicles with the N54/N54T/N55 engine and DCT transmission which were produced from 01/08/2008 to 08/31/2010. Excluding the 135i N54



(E82, E88), 335Xi N54 (E92) and 335i N55 (E93).



In order to determine whether a specific vehicle has had this Service Action completed or is affected by this Service Action, first check the B-pillar



label for code number 575. If code number 575 has been punched out, the campaign has already been performed. If code number 575 has not been



punched out, it will be necessary to utilize the "Service Menu" of DCSnet (Dealer Communication System) or the Key Reader. Based on the



response of the system, either proceed with the corrective action or take no further action.



PROCEDURE



Program the vehicle using ISTA/P 2.39.0 or a more recent version.



E8x/E9x - Integration level (new): E89x-10-09-501 or higher.



Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.



For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle



Programming.



LABEL INSTRUCTIONS



This Service Action has been assigned code number 575. After the vehicle has been checked and/or corrected, obtain a label (SD 92-380) and:



A. Emboss your BMW center warranty number in the middle of the label (1);



B. Punch out code number 575 (2), printed on the label; and



2010 BMW 335Cic Convertible (E93) L6-3.0L Turbo (N54) 169



C. Affix the label to the B-pillar as shown.



If the vehicle already has a label from a previous Service Action/Recall Campaign, affix the new label next to the old one. Do not affix one label on



top of another one because a number from an underlying label could appear in the punched-out hole of the new label.

No comments:

Post a Comment