Sunday, February 14, 2016

A/T - Hard 2-3 Upshift Or Slips, No 3rd Gear/DTC's Stored Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948)

2010 A/T - Hard 2-3 Upshift Or Slips, No 3rd Gear/DTC's Stored Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948)

Vehicle: All Technical Service Bulletins

A/T - Hard 2-3 Upshift Or Slips, No 3rd Gear/DTC's Stored

Uncomfortable Upshift 2-3

Topic number         LI27.60-P-051470

Version               1

Design group          27.60 gearshift, control

Date                  03-23-2011

Validity              All models with transmission 722.9

Reason for change

Complaint:

Hard shift operation 2-3 upshift or transmission slips (3rd gear may not be reached)

Fault codes P2502, 2505, 0894, 2711 can be entered.

Cause:

K1 piston damaged (adaptation data of shift operation 2-3 on positive/negative end stop, +20/-20 and/or +2000/-2000).

Remedy:

If the complaint can only be reproduced for the upshift from gear 2 to gear 3 or if the 3rd gear cannot be reached, there is a defect in the K1 piston.

1.     Replace complete multidisk clutch Ki as per EPC.

2.     Then readapt the vehicle.

Symptoms

Works Units

-----------------------------------------------------Page 1-----------------------------------------------------