A/T - Gear Range Can't Be Engaged/No Power Flow
Gear range cannot be engaged / no power flow
Topic number LI27.60-N-048889
Version 1
Design group 27.60 Gearshift, control
Date 02-05-2010
Validity Model 906 with automatic transmission
Reason for change
Reason for block
Complaint:
Gear range cannot be engaged.
Automatic transmission has no power flow at selector lever position D or R.
Cause:
a) Shift cable not engaged at transmission termination point.
2010 Mercedes Benz Truck Sprinter 3500 Cab (906.153) V6-3.0L DSL Turbo (642.898)
Page 95
b) Shift cable incorrectly adjusted.
Remedy:
a) Engage shift cable at transmission termination point. Check shift operation and adjust.
b) Adjust shift cable.
^ Shift mechanism and transmission in position D
^ Detach selector lever cover
^ Push sliding piece down; when it springs back the shift cable is adjusted (see Figures 1 and 2)
^ Check shift operation
Note:
Parts replacement is not necessary.
No comments:
Post a Comment