Restraints - Difficult To Pull Seat Belt Out
Driver or front passenger seat belt can only be pulled out with great effort.
Topic number LI91.40-P-047183
Version 4
Design group 91.40 Seat belts, emergency tensioning retractors
Date 04-05-2012
Validity Model series 204, 207, 212, 218
Reason for change Damage code updated
Complaint:
Seat belt can only be pulled out with great effort. At the same time a noise can be heard from the reversible reel tensioner gearing.
Cause:
The customer continuously pulled on the seat belt strap while adjusting the fit of the belt after buckling up (to reduce the slack). This caused the
drive of the reversible reel tensioner to remain engaged.
Remedy:
Insert the seat belt into the belt buckle with increased effort and switch on the ignition "circuit 15 ON". This causes the belt adjustment sequence to
be repeated and the drive of the reversible reel tensioner disengages properly. On customer request the "belt adjustment" function can be deactivated
using the multifunction buttons on the steering wheel. See operator's manual "Switching seat belt adjustment on and off".
Do not replace the seat belt!
Update the software version of the left and right reversible emergency tensioning retractor control units using XENTRY (Star Diagnosis).
Symptoms
Mercedes-Benz A220 2020 Page 52
No comments:
Post a Comment