Friday, November 18, 2022

2010 Mercedes Benz Truck Sprinter 2500 Crew (906.733) V6-3.0L DSL Turbo (642.898) Technical Service Bulletin # LI07-08_N-048806 Date: 100201

2010 Mercedes Benz Truck Sprinter 2500 Crew (906.733) V6-3.0L DSL Turbo (642.898) Technical Service Bulletin # LI07-08_N-048806 Date: 100201



Engine Controls - MIL ON And Vehicle In Limp-Home Mode



Engine in limp-home mode and engine diagnosis indicator lamp lights up



Topic number LI07.08-N-048806



Version 1



Design group 07.08 Control modules



Date 02-01-2010



Validity Model 906 with engine OM642, OM646, OM651 and diesel



particulate filter



Reason for change



Reason for block



Complaint:



The vehicle is going into limp-home mode and the Check Engine Light (CEL) is being illuminated.



Cause:



The CDI control unit has detected a fault which results in limp-home mode. The limp-home mode causes certain engine functions to be deactivated



or to use default values. The control unit can no longer correctly determine the load state of the diesel particulate filter. The state of the diesel



2010 Mercedes Benz Truck Sprinter 2500 Crew (906.733) V6-3.0L DSL Turbo (642.898)



Page 106



particulate filter may become implausible.



Remedy:



After rectifying the cause of the fault, perform workshop regeneration of the diesel particulate filter. This resets the diesel particulate filter to a

No comments:

Post a Comment