Skip to main content

Disclaimer2010 Cadillac Truck Escalade RWD V8-6.2L Technical Service Bulletin # 09-08-64-011B Date: 100326

Disclaimer2010 Cadillac Truck Escalade RWD V8-6.2L Technical Service Bulletin # 09-08-64-011B Date: 100326



Instruments - L/H Door Mirror Glass Distorted



ENGINEERING INFORMATION



Bulletin No.: 09-08-64-011B



Date: March 26, 2010



Subject: EI09080 - Left Outside Rear View Mirror, Distorted Mirror Glass (Review Engineering Results)



Models:



2009-2010 Cadillac Escalade, Escalade ESV, Escalade EXT



2009-2010 Chevrolet Avalanche, Silverado, Suburban, Tahoe



2009-2010 GMC Sierra, Yukon, Yukon XL



All Equipped with Outside Rearview Mirror RPOs DL8 or DL3



Supercede:



This bulletin is being revised to add the 2010 model year. Please discard Corporate Bulletin Number 09-08-64-011A (Section 08 - Body and



Accessories).



As a result of this EI and parts review through the Warranty Parts Center (WPC), we have found that most of our warranty claims are due to



transportation and/or customer damage and not a defect in material. Refer to published diagnostics and repairs in SI to correct any concern with the



outside rearview mirror or glass.



Note



The outside rearview mirror assembly components are serviced separately. If the concern is with one of the mirror assembly components, replace



just the components, and not the entire outside rearview mirror assembly. For the mirror glass, refer to Outside Rearview Mirror Glass Replacement



in SI. For the actuator, refer to Outside Rearview Mirror Motor Replacement in SI. For the housing, refer to Outside Rearview Mirror Housing



Replacement in SI. When replacing the mirror assembly components, refer to Groups 16.068 and 16.069 of the appropriate GM Parts Catalog for



part numbers and usage.



The 2010 warranty booklet has been updated with the following language:



Damage Due to Impact, Use, or the Environment



Windshield or glass cracks, chips or scratches due to impact are not covered. Windshield cracks will be covered for the first 12 months, regardless



of mileage if caused by defects in material or workmanship.



Lights, lens, mirrors, paint, grill, moldings and trim are not covered for cracks, chips, scratches, dents, dings and punctures or tears as a result of



impact with other objects or road hazards. In addition, cracks, chips, scratches or other damage to the face of a radio or instrument cluster from



impact or foreign objects is not covered.

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...