Skip to main content

2010 Cadillac Truck SRX FWD V6-3.0L Technical Service Bulletin # NHTSA11V595000 Date: 111220

2010 Cadillac Truck SRX FWD V6-3.0L Technical Service Bulletin # NHTSA11V595000 Date: 111220



Recall 11V595000: A/T Shift Cable Routing



VEHICLE MAKE/MODEL: MODEL YEAR(S):



Cadillac/SRX 2010-2011



MANUFACTURER: General Motors LLC.



MFR'S REPORT DATE: December 20, 2011



NHTSA CAMPAIGN ID NUMBER: 11V595000



NHTSA ACTION NUMBER: N/A



COMPONENT: Power Train: Automatic Transmission



POTENTIAL NUMBER OF UNITS AFFECTED: 8,789



2010 Cadillac Truck SRX FWD V6-3.0L Page 95



SUMMARY:



General Motors (GM) is recalling certain model year 2010-2011 Cadillac SRX vehicles manufactured from October 26, 2008, through June 23,



2011, for failing to comply with the requirements of Federal Motor Vehicle Safety Standard Number 114, "Theft Protection." These vehicles may



have a transmission shift cable that was improperly installed and may come out of the transmission bracket.



CONSEQUENCE:



The driver may be unable to shift the transmission out of gear, resulting in no motion or the shifter may inaccurately indicate that the transmission



is in park when it is not, allowing the vehicle to roll away and cause a possible crash.



REMEDY:



GM will notify owners, and dealers will ensure that the transmission shift cable is properly routed and seated in the transmission cable bracket.



This service will be performed free of charge. The safety recall is expected to begin during January 2012. Owners may contact Cadillac at



1-866-982-2339.



NOTES:



GM's safety recall campaign number is 11348. Owners may also contact The National Highway Traffic Safety Administration's Vehicle Safety

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...