2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 208

YES

The test was okay.End of test

NO

The test was not okay.Possible cause and remedy

- Test cable to component M3 (Fuel pump).

- Replace component M3 (Fuel pump).

End of test

2. No further information available.

062F

Component Y3/8n4 (Fully integrated transmission control (VGS) control unit) is defective.

Possible cause:

- Y3/8n4 (Fully integrated transmission control (VGS) control unit)

Affected functions:

- Automatic transmission Function

-------------------------------------------------

Test 1: Remedial action if component 'Y3/8n4 (Fully integrated transmission control (VGS) control unit)' is faulty

1. Remedial action if component 'Y3/8n4 (Fully integrated transmission control (VGS) control unit)' is faulty

Test prerequisites

- First of all process all other current fault codes.

POSSIBLE CAUSES

- Component Y3/8n4 (Fully integrated transmission control (VGS) control unit) is defective.

Preconditions

- Print out the initial quick test log before processing the fault code 062F.

- Create control unit log.

Important notes before commencing repair measures

- Always use the same diagnostic unit after the repair measure.

Continue with button F2

Sequence

- Data are being read from the old control unit.

Start process with button F2.

1. No further information available.

076F

The gear is implausible or the transmission is slipping. ( 7. gear )

Possible cause:

- Mechanical or hydraulic defect in the transmission ( 7. gear )

Affected functions:

- Automatic transmission Function

-------------------------------------------------