- The fault memory is erased by pressing button "F2".
Continue with button "F2"
Warning!Communication with ECU required.
ME9.7
Continuous camshaft adjustment ( RIGHT ): Incorrect position of the exhaust camshaft (P0014)
Possible cause:
- Stepless adjustment of exhaust camshaft of right cylinder bank
Affected functions:
- Engine output
-------------------------------------------------
Test 1: Exhaust camshaft of right cylinder bank
1. Exhaust camshaft of right cylinder bank
Warning!Communication with ECU required.
722.9 (7-gear) ETC2 as of 2008
The gear is implausible or the transmission is slipping. ( 2. gear )
Possible cause:
- Mechanical or hydraulic defect in the transmission ( 2. gear )
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Possible causes and remedial action when fault code 0732 is displayed
1. Possible causes and remedial action when fault code 0732 is displayed
Check oil level in automatic transmission.
IMPORTANT NOTE
- Do not unplug the STAR DIAGNOSIS unit from the diagnostic socket during the procedure.
Possible cause and remedy
- The oil level in the automatic transmission is too low.
-
Possible remedy
- Check oil level in automatic transmission.
NOTE
- Refill oil in automatic transmission up to maximum oil level mark at oil temperature of 80锟斤拷 C.
- (Refer to repair instructions: automatic transmission 722.9)
Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 27 001 75Question
- Is the fluid level in the automatic transmission OK?
No comments:
Post a Comment