Saturday, December 4, 2021

2010 Cadillac Truck SRX FWD V6-3.0L Page 782

2010 Cadillac Truck SRX FWD V6-3.0L Page 782



Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.



Control Module References (See: Testing and Inspection/Programming and Relearning) for module replacement, setup, and programming



Antilock Brake System



DTC C056D



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptor



DTC C056D 00



- Electronic Control Unit Hardware Malfunction



DTC C056D 39



- Electronic Control Unit Hardware Internal Malfunction



DTC C056D 3B



- Electronic Control Unit Hardware Self-Test Malfunction



Circuit/System Description



The internal fault detection is handled inside the control module. No external circuits are involved.



Conditions for Running the DTC



Ignition ON



Conditions for Setting the DTC



In internal hardware failure is detected.



Action Taken When the DTC Sets



* The electronic brake control module (EBCM) disables the ABS, traction control, and stability control for the duration of the ignition cycle.



* The ABS indicator turns ON.



* The traction control/stability control-active indicator turns ON.



Conditions for Clearing the DTC



* A current DTC clears when the diagnostic runs and passes.



* The EBCM will turn OFF the indicators and enable the system functions in the next ignition cycle.



Diagnostic Aids



A newly replaced EBCM can set one or more DTC on its initial ignition ON cycle.



Reference Information



Schematic Reference



Antilock Brake System Schematics (See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams)



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)



Description and Operation



ABS Description and Operation (See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Description and Operation)



Electrical Information Reference



* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit

No comments:

Post a Comment