Skip to main content

Disclaimer2010 Cadillac Truck SRX AWD V6-3.0L Technical Service Bulletin # 06-08-46-005B Date: 100211

Disclaimer2010 Cadillac Truck SRX AWD V6-3.0L Technical Service Bulletin # 06-08-46-005B Date: 100211



OnStar(R) - Availability for Hearing Impaired



INFORMATION



Bulletin No.: 06-08-46-005B



Date: February 11, 2010



Subject: Availability of OnStar(R) for Hearing Impaired



Models:



2007-2010 GM Passenger Cars and Light Duty Trucks (Including Saturn and Saab)



Except 2007 Cadillac CTS



Except 2007-2008 HUMMER H2, H2 SUT



2010 Cadillac Truck SRX AWD V6-3.0L Page 208



Except 2007 Pontiac Montana SV6



Except 2007-2010 Pontiac Vibe



Except 2007 Saturn ION, VUE



Except 2008 Saturn Astra



Supercede:



This bulletin is being revised to add a Note regarding 2009 Bluetooth(R)-equipped vehicles, additional models and model years. Please discard



Corporate Bulletin Number 06-08-46-005A (Section 08 - Body and Accessories).



Important



This service bulletin is not applicable to 'GM of Canada' dealers and retailers.



Note



On 2009 and newer model year vehicles equipped with the Bluetooth(R) feature (option code UPF), when up-fitted with TTY capabilities, the



Bluetooth(R) feature will be disabled.



OnStar with Text Telephone Capability (TTY)



General Motors is pleased to announce that the safety and security of OnStar is now available to our deaf, hard of hearing and speech impaired



customers. The current vehicles listed above, as well as forthcoming vehicles equipped with OnStar hardware version 7.0 or higher, have the ability



to utilize texting telephones. Vehicle specific TTY capability can be determined by utilizing the VIN lookup Tool. Additional information may be



found by referring to www.onstar.com/tty.



TTY equipment allows people who are deaf, hard of hearing or speech impaired, in-vehicle access to 911 and basic OnStar(R) services by pressing



the OnStar(R) blue button or red emergency button. The keypad provides a means to communicate by allowing customers to type messages back



and forth, with an OnStar(R) advisor or other party when using the OnStar(R) Hands-Free Calling feature. A TTY is required at both ends of the



conversation in order to communicate. OnStar(R) Turn by Turn Navigation and Virtual Advisor are not available with the addition of TTY.



The Reimbursement Program



This equipment will be made available to eligible customers through GM Mobility and OnStar(R). Under this program, the customer must complete



a GM Mobility application form. To take advantage of the program, vehicles must be adapted at the time of delivery for purchase / lease and a



dealer claim ($1,000 Maximum per GM Mobility guidelines) with the application form submitted to GM Mobility. Saab dealers must fax



documents. GM Dealers will receive electronic reimbursement directly from GM Mobility. Saab dealers will receive a check directly from



OnStar(R). Additional questions or concerns should be directed to the OnStar Dealer Center.



How to Order



To order the dealer installed kit, contact AutoCraft Electronics or via the web at www.autocraft.com. The kit consists of an OnStar Interface



Module, a Dial Pad (for making calls), OTIM wiring harness, the TTY device, installation/Tech 2(R) programming instructions and owner's guide.



Warranty Information



The Ultra-Tec Compact C TTY device is manufactured by an independent manufacturer and is covered by the manufacturer's warranty. It is not



covered under the GM New Vehicle Limited Warranty. All other parts (OTIM, dial pad and OTIM wiring harness) are covered by the standard GM



new vehicle parts and labor warranty. Replacement parts are available through AutoCraft Electronics. Contact AutoCraft Electronics or via the web.



Warranty claims for the OTIM, dial pad and OTIM wiring harness should be submitted through normal warranty procedures using a sublet



warranty claim with GM Labor Operation R5140.

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...