2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 2108

- A -ConnectionTest cable 35-pin socket box

- 001 -Sockets of component N3/10 (ME-SFI [ME] control unit)

- 05 -35-pin socket box

- 050 -126-pin socket box

- 108 -Test cable 266 589 01 63 00

- N3/10 (ME-SFI [ME] control unit)

- II 1-63ConnectionTest cable

- III 64-126ConnectionTest cable

Warning!

-

- Connection A of test cable 108 may NOT be connected to connection B of the 126-pin socket box (050).

Continue to test with button F2

Test current consumption of component N10/1kR (Circuit 87 relay, engine).

Test sequence

- Measure direct current with multimeter between sockets [F.4] 100 and [F.27] 123 of the 126-pole socket box tester.

- Switch on ignition.

Specified value

- Amperage[0.1...0.3] A

Question

- Is the measurement value OK?

YES

The test was okay.End of test

NO

The measurement value is not OK.Possible cause and remedy

- Lines to component N10/1kR (Circuit 87 relay, engine)

- N10/1kR (Circuit 87 relay, engine)

End of test

1.1.3.2.1.4. Check power supply at control unit N15/3 (ETC [EGS] control unit).

Test 1.1.3.2.1.4.1: Guided test