- Switch on ignition.
Specified value
- Voltage[11.0...15.0] V
Question
- Is the measurement value OK?
YES
The measurement value is OK.End of test
NO
The measurement value is not OK.Possible cause and remedy
- N10/1f52 (Fuse 52)
- Lines
End of test
2. Arrangement of fuses
Figure legend/figure
- N10/1 (Driver-side SAM control unit with fuse and relay module)
Fuses
- FuseF43-F67
Relays
- I =N10/1kI (Circuit 87 relay, engine)
- K =N10/1kK (Circuit 87 relay, chassis)
- L =N10/1kL (Starter relay)
- M =N10/1kM (SEQ [ASG] pump control relay)
- N =N10/1kN (Circuit 15 relay)
- O =N10/1kO (FAN relay module)
- P =N10/1kP (Circuit 15R relay)
- R =N10/1kR (Air pump or oil cooler fan relay)
3. Check component Y58/1 (Purge control valve).
Test 3.1: Actuate component Y58/1 (Purge control valve).
No comments:
Post a Comment