Test sequence
- Measure direct voltage with multimeter between sockets (M.80) 80 and (M.44) 44 of the 126-pole socket box tester.
- Switch on ignition.
Specified value
- Voltage[4.8...5.3] V
Question
- Is the measurement value OK?
YES
The measurement value is OK.Possible cause and remedy
- Signal wire
- B70 (Crankshaft Hall sensor)
End of test
NO
The measurement value is not OK.Possible cause and remedy
- Lines to component B70 (Crankshaft Hall sensor)
End of test
0705
Component Y3/8s1 (Selection range sensor (VGS)) is defective.
Possible cause:
- Y3/8s1 (Selection range sensor (VGS))
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action if component 'Y3/8s1 (Selection range sensor (VGS))' is faulty
1. Remedial action if component 'Y3/8s1 (Selection range sensor (VGS))' is faulty
No comments:
Post a Comment