The filler cap is not closed.
Possible cause:
- Fuel filler cap missing.
Affected functions:
- Fuel system
-------------------------------------------------
Test 1: The filler cap is not closed.
1. The filler cap is not closed.
Possible cause and remedy
- Lock filler cap.
E1124
Start enable of DAS not sent : See fault codes in control unit EZS (P0513)
Possible cause:
- N73 (EIS [EZS] control unit)
Affected functions:
- Engine start
-------------------------------------------------
Test 1: Check component N73 (EIS [EZS] control unit).
1. Check component N73 (EIS [EZS] control unit).
Possible cause and remedy
- Read out fault memory of control unit N73 (EIS [EZS] control unit).
End of test
Part 1
CAN signal 'Torque request' from control unit Air conditioning is implausible.
Possible cause:
- Control unit Air conditioning
Affected functions:
- Heating
-------------------------------------------------
Test 1: Engine compartment CAN test
Test 2: Check component N22 (AAC [KLA] control and operating unit).
1. Engine compartment CAN test
Test 1.1: Engine compartment CAN test
1.1. Engine compartment CAN test
Test 1.1.1: Procedure in case of CAN faults
Test 1.1.2: Read current CAN configuration and CAN fault codes
No comments:
Post a Comment