Saturday, October 2, 2021

2010 Cadillac Truck SRX FWD V6-3.0L Page 403

2010 Cadillac Truck SRX FWD V6-3.0L Page 403



DTC B0959 21: Parking Aid Rear Sensor Left Middle Circuit Incorrect Period



DTC B0959 3A: Parking Aid Rear Sensor Left Middle Circuit Incorrect Component Installed



DTC B0960 01: Parking Aid Rear Sensor Right Middle Circuit Short to Battery



DTC B0960 06: Parking Aid Rear Sensor Right Middle Circuit Low Voltage/Open



DTC B0960 08: Parking Aid Rear Sensor Right Middle Circuit Performance - Signal Invalid



DTC B0960 21: Parking Aid Rear Sensor Right Middle Circuit Incorrect Period



DTC B0960 3A: Parking Aid Rear Sensor Right Middle Circuit Incorrect Component Installed



DTC B0961 01: Parking Aid Rear Sensor Right Corner Circuit Short to Battery



DTC B0961 06: Parking Aid Rear Sensor Right Corner Circuit Low Voltage/Open



DTC B0961 08: Parking Aid Rear Sensor Right Corner Circuit Performance - Signal Invalid



DTC B0961 21: Parking Aid Rear Sensor Right Corner Circuit Incorrect Period



DTC B0961 3A: Parking Aid Rear Sensor Right Corner Circuit Incorrect Component Installed



Diagnostic Fault Information



Circuit/System Description



The object sensors are 3-wire sensors that are used to determine the distance between the vehicle and an object of interest. The parking assist



control module supplies 8 V to the object sensors via the 8 V reference circuit and provides ground via the low reference circuit. The parking assist



control module triggers the sensors in a sequential loop. After each sensor transmits, the parking assist control module uses the sensor echo



received through the signal circuit to calculate the distance and position of an object.



Conditions for Running the DTC



^ Ignition ON



^ The parking assist is activated. The activation takes place through putting in the reverse gear or through operating the park assist switch.



Conditions for Setting the DTC



B0958 01, B0959 01, B0960 01, or B0961 01



The parking assist control module has detected the voltage at the sensor circuit is greater than 11.5 V or the object sensor is not grounded.



B0958 06, B0959 06, B0960 06, or B0961 06



The parking assist control module has detected the voltage at the sensor circuit less than 0.5 V.



B0958 08, B0959 08, B0960 08, or B0961 08

No comments:

Post a Comment