Skip to main content

More 2021 GMC Sierra 1500 22-Inch Wheels Are Available To Order Again


Text
As GM Authority was the first to report earlier in the year, General Motors experienced a supplier issue with its 22-inch wheel options, as all LPO (dealer-installed) 22-inch GM wheels were made unavailable due to constraints in the supply chain. Now, however, some of the 22-inch wheels offered for the 2021 GMC Sierra 1500 are available to order again.
The optional 2021 GMC Sierra 1500 22-inch wheels that are once again available to order include (relevant RPO codes listed in parentheses):
Each of the 22-inch wheels listed here is offered exclusively with SLT and Denali trim levels. To note, these wheels are offered as LPO-level options, which means they are delivered to and installed by the dealer, rather than installed when the vehicle is first produced.
The models affected by the 22-inch wheel availability issue first reported by GM Authority in January included the GMC Sierra 1500, Chevy Silverado 1500, Chevy Tahoe, Chevy Suburban, GMC Yukon, and Cadillac Escalade.
In a follow-up report, GM Authority revealed that the supplier issues related to the 22-inch wheel shortage were unrelated to production, but rather, the wheels in questions had already been shipped over from China and were sitting in containers in the port of Los Angeles waiting to clear customs.
According to one source, the number of stacked containers was so high, it looked like a “skyscraper.”
Now, some of these wheels are slowly becoming available to order again. That includes 22-inch wheel options for the 2021 Chevy Silverado, including the 22-inch six-spoke Low Gloss Black wheels with machined accents (SEV), 22-inch Dark Silver aluminum wheels with Chrome inserts (SEW), and 22-inch High Gloss Black wheels (SGW), as GM Authority reported in May.
Subscribe to GM Authority for more GMC Sierra news, GMC news, and around-the-clock General Motors news coverage.

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...