Skip to main content

2021 GMC Sierra 1500 Performance Upgrade Package Unavailable To Order


Text
The Performance Upgrade Package offered for the 2021 GMC Sierra 1500 is no longer available to order.
The Performance Upgrade Package for the 2021 GMC Sierra 1500 is tagged with RPO code PDM, and was offered as an LPO-level option, which means it was delivered to and installed by the dealer, rather than installed at the factory when the vehicle was first produced.
The 2021 GMC Sierra 1500 Performance Upgrade Package includes the following content (relevant RPO codes listed in parentheses):
Both items listed above are LPO-level items as well.
The 2021 GMC Sierra 1500 Performance Upgrade Package was offered as an optional extra on GMC Sierra 1500 SLT, AT4, and Denali trim levels. The package required the naturally aspirated 6.2L V8 L87 gasoline engine, which, in standard spec, is rated at 420 horsepower at 5,600 rpm and 460 pound-feet of torque at 4,100 rpm.
It should also be noted that the 2021 GMC Sierra 1500 Performance Upgrade Package is part of the Off-Road Performance Package (RPO code PCJ) offered as an optional extra for the GMC Sierra 1500 AT4. As a result, the Off-Road Performance Package is also unavailable to order.
The unavailability of the Performance Upgrade Package extends beyond the 2021 GMC Sierra 1500. The package is also unavailable for the 2021 Chevy Tahoe and 2021 Chevy Suburban, as GM Authority covered previously.
Looking ahead, the 2021 GMC Sierra 1500 will be replaced with the 2022 GMC Sierra 1500 Limited. Orders for the new 2022 GMC Sierra 1500 Limited are now open.
The 2022 GMC Sierra 1500 Limited will serve as a “stop-gap” model to bridge the 2021 GMC Sierra 1500 with the fully refreshed 2022 GMC Sierra. As such, the 2022 GMC Sierra 1500 Limited offers the same trim levels, exterior colors, and interior colors as the 2021 model year, ushering in the 2022 model year prior to the arrival of the fully refreshed pickup.
Subscribe to GM Authority for more GMC Sierra news, GMC news, and around-the-clock General Motors news coverage.

Labels

Labels:

Comments

Post a Comment

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...
Read more

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...
Post a Comment
Read more

D138， Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...
Post a Comment
Read more