NO
The measurement value is not OK.Figure legend 1:N71 (Headlamp range adjustment control module)Figure legend 2:N10/1 (Front SAM control
unit with fuse and relay module)Possible cause and remedy
- Cable (N10/1) 24.1 - (N71) 19 is faulty .
- Cable (N71) 20 - W16/3 (Ground (left of component compartment, power ground)) is faulty .
- N10/1 (Front SAM control unit with fuse and relay module)
End of test
1.3.2.1.9. Check power supply at control unit N93 (Central gateway control unit).
No comments:
Post a Comment