Test prerequisites
- Actuation is not OK.
Test sequence
- Measure direct current with multimeter between sockets (F.4) 100 and (M.19) 19 of the 126-pole socket box tester.
- Switch on ignition.
Specified value
- Amperage[0.2...0.6] A
Question
- Is the measurement value OK?
YES
The measurement value is OK.Further possible causes of fault
- Vacuum unit for variable intake manifold
End of test
NO
The measurement value is not OK.Possible cause and remedy
- Voltage supply of component Y22/9 (Intake manifold tumble flap switchover valve)(N10/1f57 (Fuse 57))
- Wiring from control unit N3/10 (ME-SFI [ME] control unit) to component Y22/9 (Intake manifold tumble flap switchover valve)
- Y22/9 (Intake manifold tumble flap switchover valve)
1197
Constant adjustment of exhaust camshaft of right cylinder bank in direction 'Advanced' (P0017)
Possible cause:
- Exhaust camshaft of right cylinder bank
Affected functions:
- Engine diagnosis
-------------------------------------------------
No comments:
Post a Comment