Test sequence
- Switch off ignition.
- Remove fuel rail together with component Y62y3 (Fuel injector cylinder 3).
- Bridge between sockets (F.2) 98 and (F.17) 113 of the 126-pole socket box tester.
- Switch on ignition.
- Component M3 (Fuel pump) runs.
- Hold component Y62y3 (Fuel injector cylinder 3) in a vessel and briefly operate manually with shop-made test cable set at sockets 98 and 99
of the 126-pin socket box.
Specified value
- Fuel injectors should eject fuel uniformly.
Question
- Was the test o.k.?
YES
The test was okay. End of test
NO
The test was not okay.Possible cause and remedy
- Y62y3 (Fuel injector cylinder 3)
No comments:
Post a Comment