Skip to main content

2010 Cadillac Truck SRX AWD V6-3.0L Technical Service Bulletin # 10-08-46-001 Date: 100127

2010 Cadillac Truck SRX AWD V6-3.0L Technical Service Bulletin # 10-08-46-001 Date: 100127



Audio - Radio Does Not Mute Enough When Using OnStar(R)



TECHNICAL



Bulletin No.: 10-08-46-001



Date: January 27, 2010



Subject: Radio Does Not Mute Enough When OnStar(R) Turn-by Turn Navigation Directions Are Announced (Increase Volume Setting or



Request Soft Mute Feature Change Through OnStar(R) Customer Service)



Models:



2009-2010 GM Passenger Cars and Trucks (Including Saturn)



2009-2010 HUMMER H2, H3



2009 Saab 9-7X



All Equipped with OnStar(R) (RPO UE1)



Condition



Some customers may comment that when the radio is on, it does not mute enough when the OnStar(R) Turn-by-Turn Navigation directions are



announced.



Cause



This condition may be caused by the customer improperly setting the radio volume high enough when the Turn-by-Turn Navigation messages are



played.



The 2009 and 2010 models with OnStar(R) initiates a "soft mute" feature when the radio is on during Turn-by-Turn Navigation direction



announcements. During the announcement, the radio can still be heard at a very low volume. Previous model years initiated a "hard mute" during



this function which completely muted the radio audio.



Correction



Instruct the customer to increase the radio volume while getting the Turn-by-Turn Navigation direction announcements. You can control the



message volume using the radio volume control, only when the Turn-by-Turn navigation messages are playing.



Some customers that were accustomed to previous model vehicles with the "hard mute" feature may be dissatisfied with the function of the "soft



mute" feature. For those customers, contact the OnStar(R) Customer Service Center by pushing the Blue OnStar(R) Button to speak to a trained



Advisor and request a change be made to the vehicle from the "soft mute" setting to that of the hard or complete muting of audio playback during



Turn by Turn directions. OnStar(R) will then create a case number. Advise the customer that the vehicle update should be completed Over the Air



within 5 business days, after which an OnStar(R) Customer Care advisor will follow-up with the customer to verify the fix. If the customer does not



hear back from OnStar(R) within a week, advise them to press the Blue OnStar(R) Button and ask for Customer Care to check status.



Warranty Information (excluding Saab U.S. Models)



For vehicles repaired under warranty, use:



Warranty Information (Saab U.S. Models)



2010 Cadillac Truck SRX AWD V6-3.0L Page 191



For vehicles repaired under warranty, use the table above.

Comments

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...