2010 Cadillac Truck SRX AWD V6-3.0L Page 2058

2010 Cadillac Truck SRX AWD V6-3.0L Page 2058

P2534

The TCM detects ignition voltage between 2.0 volts and 6.0 volts for 7 seconds or greater with the engine running.

Action Taken When the DTC Sets

P0562 and P0563

DTCs P0562 and P0563 are Type C DTCs.

P2534

* DTC P2534 is a Type A DTC.

* The TCM turns OFF all high side drivers.

* The TCM turns OFF all solenoids.

* The TCM commands maximum line pressure.

* The TCM freezes transmission adaptive functions.

* The TCM commands the torque converter clutch (TCC) OFF.

* The TCM allows the transmission to operate in reverse and fifth range.

* The TCM inhibits Tap Up/Down function.

* The TCM inhibits manual shifting of forward gears.

Conditions for Clearing the DTC

* DTCs P0562 and P0563 are Type C DTCs.

* DTC P2534 is a Type A DTC.

Diagnostic Aids

* Observe the driver information center (DIC) messaging that would indicate the electrical system requires service.

* Running the engine with a battery charger attached may cause DTC P0563 to set.

* Inspect for the following conditions:

- Loose or damaged terminals at the generator

- Loose or worn generator drive belt

Reference Information

Schematic Reference

Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams)

Connector End View Reference

* Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)

* Inline Harness Connector End Views (See: Diagrams/Connector Views/Multiple Junction Connector/Connector End Views By Number)

Description and Operation

Transmission General Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/6T70/6T75 -

Automatic Transmission/Transmission General Description)

Electrical Information Reference

* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit

Testing/Circuit Testing)

* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic

Procedures/Connector Repairs/Connector Repairs)

* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General

Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)

* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring

Repairs/Wiring Repairs)

DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code

(DTC) Type Definitions)

Scan Tool Reference

Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information

Special Tools

DT-47825-20 Adapter Harness