2010 Cadillac CTS Sedan AWD V6-3.6L Page 264
programming.
B0968
DTC B0968
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions) provides an overview of each diagnostic category.
DTC Descriptor
DTC B0968 00
- Parking Aid Indicator Circuit
Diagnostic Fault Information
Circuit/System Description
The rear object sensor control module directly controls the parking assist indicators located in the rear parking assist display. The rear object sensor
control module monitors the voltage supplied to the rear parking assist display to verify it is within operating range. The rear parking assist display
consists of two amber and one red LED that indicate the distance of an object from the rear bumper. As objects become progressively closer to the
bumper, the rear object sensor control module will illuminate the LEDs in a sequence: one amber LED, both amber LEDs, and lastly, both amber
LEDs and the red LED.
Conditions for Running the DTC
* DTC B1325 is not set
* Ignition voltage is between 9-16 volts
* Transmission in REVERSE
Conditions for Setting the DTC
The rear object sensor control module detects that one of the three indicator control circuits or the supply voltage is shorted to ground.
Action Taken When the DTC Sets
* Rear parking assist system is disabled.
* The rear object sensor control module commands the red indicator ON.
* The rear object sensor control module sends a serial data message to the instrument panel cluster (IPC) to display SERVICE PARK ASSIST
message in the driver information center (DIC) and a chime will sound.
Conditions for Clearing
* The DTC will transition to history when the fault is no longer present.
* A history DTC will clear after 100 malfunction-free ignition cycles.
Reference Information
Schematic Reference
Object Detection Schematics (See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Diagrams/Electrical
Diagrams)
Connector End View Reference
No comments:
Post a Comment